Daily Papers

LLM agent failures are difficult to debug because the step where an error surfaces is often not the one that caused it. Existing observability tools replay execution traces but provide little support for identifying the root cause or translating diagnosis into recovery. We present AgentDebugX, an open-source debugging framework that organizes debugging as a closed loop of Detect, Attribute, Recover, and Rerun. At its core, DeepDebug performs multi-turn root-cause diagnosis through global trajectory understanding, structure-guided investigation, and cross-examination. On the Who and When benchmark, DeepDebug achieves the best strict attribution accuracy among the evaluated methods on both tested open-weight backbones, reaching 28.8 percent exact agent-and-step accuracy on qwen3.5-9b versus 21.7 percent for the strongest single-pass baseline. On GAIA, DeepDebug repairs 13 of 73 failed tasks in a single rerun, compared with 4 to 6 for three decoupled self-correction baselines, improving overall accuracy from 55.8 percent to 63.6 percent. AgentDebugX exposes this workflow through a Python library, CLI, web console, and installable agentic skill, and provides an opt-in Error Hub for sharing scrubbed failure-diagnosis-repair bundles and reusing them as debugging memory.

Large language models (LLMs) demonstrate remarkable reasoning capabilities, yet their stateless architecture fundamentally limits deployment in long-horizon research workflows requiring multi-session continuity and quantitative rigor. Here we present Ensemble QSP, a multi-agent framework featuring a three-layer hierarchical memory architecture that keeps injected context bounded and constant in project duration (mid-term project state: median 301 tokens, max 4,050, across 104 runs) by capping each state category and evicting completed work, enabling continuous autonomous operation without context degradation. The system orchestrates five specialist worker agents under domain-expert principal investigators, enforcing physical constraints through physics-based checklists and structured-domain knowledge. Comprehensive benchmarking demonstrates robust autonomous pharmacokinetic-pharmacodynamic model selection without human intervention, consistent result quality across both lower-cost and frontier LLMs, improved PK parameter recovery relative to single-agent baselines, and stable model selection across linguistically diverse prompts of the same task. Feature-level ablation across physiologically based pharmacokinetic (PBPK) models spanning a broad complexity range shows that PI-agent oversight improves debugging efficiency while preserving final accuracy across conditions. The architecture is structurally domain-agnostic, adding a new scientific domain requires only a new PI agent configuration.

AI coding assistants now support a growing share of software work, from quick scripts to production applications. Yet these agents remain largely stateless: each new session re-reads project files, re-derives prior decisions, and - most costly - may repeat debugging attempts that already failed. Reconstructing this context can consume an estimated 5,000-20,000 tokens per session; the bottleneck is often not model capability but missing project memory. We present projectmem, an open-source, local-first memory and judgment layer for AI coding agents. projectmem records development as an append-only, plain-text event log of typed events - issues, attempts, fixes, decisions, and notes - and deterministically projects that log into compact, AI-readable summaries served through the Model Context Protocol (MCP). Beyond storage, projectmem adds a deterministic pre-action gate that warns an agent before it repeats a previously failed fix or edits a known-fragile file. We frame this as Memory-as-Governance: memory that does not merely answer the agent but acts on its next action. The system runs fully offline with no telemetry; its immutable log also serves as a provenance trail for reproducible, auditable AI-assisted development. projectmem ships as a three-dependency Python package (14 MCP tools, 19 CLI commands, 37 automated tests) and is evaluated through a two-month self-study across 10 projects comprising 207 logged events. Source code: https://github.com/riponcm/projectmem.

With the growing adoption of Large Language Models (LLMs) in automating complex, multi-agent workflows, organizations face mounting risks from errors, emergent behaviors, and systemic failures that current evaluation methods fail to capture. We present AgentCompass, the first evaluation framework designed specifically for post-deployment monitoring and debugging of agentic workflows. AgentCompass models the reasoning process of expert debuggers through a structured, multi-stage analytical pipeline: error identification and categorization, thematic clustering, quantitative scoring, and strategic summarization. The framework is further enhanced with a dual memory system-episodic and semantic-that enables continual learning across executions. Through collaborations with design partners, we demonstrate the framework's practical utility on real-world deployments, before establishing its efficacy against the publicly available TRAIL benchmark. AgentCompass achieves state-of-the-art results on key metrics, while uncovering critical issues missed in human annotations, underscoring its role as a robust, developer-centric tool for reliable monitoring and improvement of agentic systems in production.

We present Large Language Model for Mixed Reality (LLMR), a framework for the real-time creation and modification of interactive Mixed Reality experiences using LLMs. LLMR leverages novel strategies to tackle difficult cases where ideal training data is scarce, or where the design goal requires the synthesis of internal dynamics, intuitive analysis, or advanced interactivity. Our framework relies on text interaction and the Unity game engine. By incorporating techniques for scene understanding, task planning, self-debugging, and memory management, LLMR outperforms the standard GPT-4 by 4x in average error rate. We demonstrate LLMR's cross-platform interoperability with several example worlds, and evaluate it on a variety of creation and modification tasks to show that it can produce and edit diverse objects, tools, and scenes. Finally, we conducted a usability study (N=11) with a diverse set that revealed participants had positive experiences with the system and would use it again.

Large Language Models (LLMs) have demonstrated remarkable capabilities in Register Transfer Level (RTL) design, enabling high-quality code generation from natural language descriptions. However, LLMs alone face significant limitations in real-world hardware design workflows, including the inability to execute code, lack of debugging capabilities, and absence of long-term memory. To address these challenges, we present ASIC-Agent, an autonomous system designed specifically for digital ASIC design tasks. ASIC-Agent enhances base LLMs with a multi-agent architecture incorporating specialized sub-agents for RTL generation, verification, OpenLane hardening, and Caravel chip integration, all operating within a comprehensive sandbox environment with access to essential hardware design tools. The system leverages a vector database containing documentation, API references, error knowledge, and curated insights from the open-source silicon community. To evaluate ASIC-Agent's performance, we introduce ASIC-Agent-Bench, the first benchmark specifically designed to assess agentic systems in hardware design tasks. We evaluate ASIC-Agent with various base LLMs, providing quantitative comparisons and qualitative insights into agent behavior across different design scenarios. Our results demonstrate that ASIC-Agent, when powered by Claude 4 Sonnet, successfully automates a broad range of ASIC design tasks spanning varying levels of complexity, showing the potential of significantly accelerating the ASIC design workflow.

Large language models (LLMs) have advanced code generation from single-function tasks to competitive-programming problems, but existing multi-agent solutions either rely on costly large-scale (>30B) models or collapse when downsized to small open-source models. We present MapCoder-Lite, a framework for distilling the complex reasoning of large, multi-agent coding systems into a single 7B model. Our contribution is a novel, three-pillar methodology that synergistically generates, refines, and encodes multi-agent knowledge: (i) pass-based trajectory distillation from strong LLMs fixes format fragility in retrieval and reduces failures in debugging, (ii) supervisor-guided correction with global feedback strengthens planning and coding agents, and (iii) agent-wise LoRA fine-tuning delivers memory-efficient specialisation. Comprehensive evaluation on xCodeEval, APPS, and CodeContests shows that MapCoder-Lite more than doubles xCodeEval accuracy (from 13.2% to 28.3%), eliminates all format failures, while reducing GPU memory and token-generation time by 4x compared to a 32B model. It also achieves over 10% gains on simpler coding benchmarks, demonstrating broad improvements beyond competitive programming. These results demonstrate that careful agent-wise fine-tuning unleashes high-quality multi-agent coding on a small language model. Our code is publicly available at https://github.com/aiha-lab/MapCoder-Lite.

Memory is essential for enabling large language models to support long-horizon reasoning, yet existing memory systems remain unreliable and difficult to debug. Tracing memory's dynamic evolution is crucial to understand how information is synthesized, propagated, or corrupted over time. In this work, we study the new problem of error tracing and attribution in LLM memory systems. We propose a novel framework that transforms memory pipelines into executable memory evolution graphs, enabling fine-grained tracing of operational information flow. We then construct MemTraceBench, a benchmark collected from representative memory systems such as Long-Context, RAG, Mem0, and EverMemOS, to systematically study memory failure modes. We further introduce an automatic attribution method that iteratively traces operation subgraphs to pinpoint the root cause of any failed case. Our analysis reveals that memory failures are systematic, stemming from operation-level issues like information loss and retrieval misalignment. Crucially, we leverage these fine-grained attribution signals to guide downstream prompt optimization, establishing a closed-loop system that automatically corrects faults and boosts end-task performance by up to 7.62%. Code will be released at https://github.com/zjunlp/MemTrace.

Large language models (LLMs) are leading significant progress in code generation. Beyond one-pass code generation, recent works further integrate unit tests and program verifiers into LLMs to iteratively refine the generated programs. However, these works consider the generated programs as an indivisible entity, which falls short for LLMs in debugging the programs, especially when the programs contain complex logic flows and data operations. In contrast, when human developers debug programs, they typically set breakpoints and selectively examine runtime execution information. The execution flow and the intermediate variables play a crucial role in the debugging process, yet they are underutilized in the existing literature on code generation. In this study, we introduce Large Language Model Debugger (LDB), a novel debugging framework that enables LLMs to refine their generated programs with the runtime execution information. Specifically, LDB segments the programs into basic blocks and tracks the values of intermediate variables after each block throughout the runtime execution. This allows LLMs to concentrate on simpler code units within the overall execution flow, verify their correctness against the task description block by block, and efficiently pinpoint any potential errors. Experiments demonstrate that LDB consistently enhances the baseline performance by up to 9.8% across the HumanEval, MBPP, and TransCoder benchmarks, archiving new state-of-the-art performance in code debugging for various LLM selections.

Large Language Models (LLMs) have demonstrated exceptional coding capability. However, as another critical component of programming proficiency, the debugging capability of LLMs remains relatively unexplored. Previous evaluations of LLMs' debugging ability are significantly limited by the risk of data leakage, the scale of the dataset, and the variety of tested bugs. To overcome these deficiencies, we introduce `DebugBench', an LLM debugging benchmark consisting of 4,253 instances. It covers four major bug categories and 18 minor types in C++, Java, and Python. To construct DebugBench, we collect code snippets from the LeetCode community, implant bugs into source data with GPT-4, and assure rigorous quality checks. We evaluate two commercial and three open-source models in a zero-shot scenario. We find that (1) while closed-source models like GPT-4 exhibit inferior debugging performance compared to humans, open-source models such as Code Llama fail to attain any pass rate scores; (2) the complexity of debugging notably fluctuates depending on the bug category; (3) incorporating runtime feedback has a clear impact on debugging performance which is not always helpful. As an extension, we also compare LLM debugging and code generation, revealing a strong correlation between them for closed-source models. These findings will benefit the development of LLMs in debugging.

Debugging consumes a substantial portion of the software development lifecycle, yet the effectiveness of Large Language Models(LLMs) in this task is not well understood. Competitive programming offers a rich benchmark for such evaluation, given its diverse problem domains and strict efficiency requirements. We present an empirical study of LLM-based debugging on competitive programming problems and introduce DePro, a test-case driven approach that assists programmers by correcting existing code rather than generating new solutions. DePro combines brute-force reference generation, stress testing, and iterative LLM-guided refinement to identify and resolve errors efficiently.Experiments on 13 faulty user submissions from Codeforces demonstrate that DePro consistently produces correct solutions, reducing debugging attempts by up to 64% and debugging time by an average of 7.6 minutes per problem compared to human programmers and zero-shot LLM debugging.

Large language models (LLMs) have achieved impressive performance on code generation. However, for complex programming tasks, generating the correct solution in one go becomes challenging, thus some prior works have designed program repair approaches to improve code generation performance. In this work, we propose Self-Debugging, which teaches a large language model to debug its predicted program via few-shot demonstrations. In particular, we demonstrate that Self-Debugging can teach the large language model to perform rubber duck debugging; i.e., without any feedback on the code correctness or error messages, the model is able to identify its mistakes by explaining the generated code in natural language. Self-Debugging achieves the state-of-the-art performance on several code generation benchmarks, including the Spider dataset for text-to-SQL generation, TransCoder for C++-to-Python translation, and MBPP for text-to-Python generation. On the Spider benchmark where there are no unit tests to verify the correctness of predictions, Self-Debugging with code explanation consistently improves the baseline by 2-3%, and improves the prediction accuracy on problems of the hardest label by 9%. On TransCoder and MBPP where unit tests are available, Self-Debugging improves the baseline accuracy by up to 12%. Meanwhile, by leveraging feedback messages and reusing failed predictions, Self-Debugging notably improves sample efficiency, and can match or outperform baseline models that generate more than 10x candidate programs.

Training large language models (LLMs) on Python execution traces grounds them in code execution and enables the line-by-line execution prediction of whole Python programs, effectively turning them into neural interpreters (FAIR CodeGen Team et al., 2025). However, developers rarely execute programs step by step; instead, they use debuggers to stop execution at certain breakpoints and step through relevant portions only while inspecting or modifying program variables. Existing neural interpreter approaches lack such interactive control. To address this limitation, we introduce neural debuggers: language models that emulate traditional debuggers, supporting operations such as stepping into, over, or out of functions, as well as setting breakpoints at specific source lines. We show that neural debuggers -- obtained via fine-tuning large LLMs or pre-training smaller models from scratch -- can reliably model both forward execution (predicting future states and outputs) and inverse execution (inferring prior states or inputs) conditioned on debugger actions. Evaluated on CruxEval, our models achieve strong performance on both output and input prediction tasks, demonstrating robust conditional execution modeling. Our work takes first steps towards future agentic coding systems in which neural debuggers serve as a world model for simulated debugging environments, providing execution feedback or enabling agents to interact with real debugging tools. This capability lays the foundation for more powerful code generation, program understanding, and automated debugging.

Unlike code completion, debugging requires localizing faults and applying targeted edits. We observe that frontier LLMs often regenerate correct but over-edited solutions during debugging. To evaluate how far LLMs are from precise debugging, we introduce the Precise Debugging Benchmark (PDB) framework, which automatically converts any coding dataset into a debugging benchmark with precision-aware evaluation. PDB generates buggy programs by synthesizing verified atomic bugs and composing them into multi-bug programs. We define two novel metrics, edit-level precision and bug-level recall, which measures how many necessary edits are made and how many bugs are resolved. We release two evaluation benchmarks: PDB-Single-Hard on single-line bugs, and PDB-Multi on multi-line bugs. Experiments show that frontier models, such as GPT-5.1-Codex and DeepSeek-V3.2-Thinking, achieve unit-test pass rates above 76% but exhibit precision below 45%, even when explicitly instructed to perform minimal debugging. Finally, we show that iterative and agentic debugging strategies do not substantially improve precision or recall, highlighting the need to rethink post-training pipelines for coding models.

Memory leaks remain prevalent in real-world C/C++ software. Static analyzers such as CodeQL provide scalable program analysis but frequently miss such bugs because they cannot recognize project-specific custom memory-management functions and lack path-sensitive control-flow modeling. We present MemHint, a neuro-symbolic pipeline that addresses both limitations by combining LLMs' semantic understanding of code with Z3-based symbolic reasoning. MemHint parses the target codebase and applies an LLM to classify each function as a memory allocator, deallocator, or neither, producing function summaries that record which argument or return value carries memory ownership, extending the analyzer's built-in knowledge beyond standard primitives such as malloc and free. A Z3-based validation step checks each summary against the function's control-flow graph, discarding those whose claimed memory operation is unreachable on any feasible path. The validated summaries are injected into CodeQL and Infer via their respective extension mechanisms. Z3 path feasibility filtering then eliminates warnings on infeasible paths, and a final LLM-based validation step confirms whether each remaining warning is a genuine bug. On eight real-world C/C++ projects totaling over 3.6M lines of code, MemHint detects 54 unique memory leaks (53 confirmed/fixed) at approximately $1.7 per detected bug, compared to 19 by vanilla CodeQL and 3 by vanilla Infer.

Large language models (LLMs) have made significant progress in code generation tasks, but their performance in tackling programming problems with complex data structures and algorithms remains suboptimal. To address this issue, we propose an in-context learning approach that guides LLMs to debug by using a "print debugging" method, which involves inserting print statements to trace and analysing logs for fixing the bug. We collect a Leetcode problem dataset and evaluate our method using the Leetcode online judging system. Experiments with GPT-4 demonstrate the effectiveness of our approach, outperforming rubber duck debugging in easy and medium-level Leetcode problems by 1.5% and 17.9%.

Large Language Model (LLM)-based agents are increasingly deployed for complex, tool-based tasks where long-term memory is critical to driving actions. Existing benchmarks, however, primarily test a angent's ability to passively retrieve isolated facts in response to explicit questions. They fail to evaluate the more crucial capability of actively applying memory to execute tasks. To address this gap, we introduce Mem2ActBench, a benchmark for evaluating whether agents can proactively leverage long-term memory to execute tool-based actions by selecting appropriate tools and grounding their parameters. The benchmark simulates persistent assistant usage, where users mention the same topic across long, interrupted interactions and expect previously established preferences and task states to be implicitly applied. We build the dataset with an automated pipeline that merges heterogeneous sources (ToolACE, BFCL, Oasst1), resolves conflicts via consistency modeling, and synthesizes 2,029 sessions with 12 user--assistant--tool turns on average. From these memory chains, a reverse-generation method produces 400 tool-use tasks, with human evaluation confirming 91.3\% are strongly memory-dependent. Experiments on seven memory frameworks show that current systems remain inadequate at actively utilizing memory for parameter grounding, highlighting the need for more effective approaches to evaluate and improve memory application in task execution.

Memory-augmented LLM agents store and retrieve information from prior interactions, yet the relative importance of how memories are written versus how they are retrieved remains unclear. We introduce a diagnostic framework that analyzes how performance differences manifest across write strategies, retrieval methods, and memory utilization behavior, and apply it to a 3x3 study crossing three write strategies (raw chunks, Mem0-style fact extraction, MemGPT-style summarization) with three retrieval methods (cosine, BM25, hybrid reranking). On LoCoMo, retrieval method is the dominant factor: average accuracy spans 20 points across retrieval methods (57.1% to 77.2%) but only 3-8 points across write strategies. Raw chunked storage, which requires zero LLM calls, matches or outperforms expensive lossy alternatives, suggesting that current memory pipelines may discard useful context that downstream retrieval mechanisms fail to compensate for. Failure analysis shows that performance breakdowns most often manifest at the retrieval stage rather than at utilization. We argue that, under current retrieval practices, improving retrieval quality yields larger gains than increasing write-time sophistication. Code is publicly available at https://github.com/boqiny/memory-probe.

Users of modern platforms repeatedly need summaries of recent dialogue, but the window rarely contains enough context to be interpreted on its own. We formalize this setting as streaming dialogue summarization, where a system must summarize a current window using selective memory from an unbounded history under a fixed budget. We show that the central challenge is not how much history is accessed, but whether memory recovers the evidence that the current window presupposes. We construct a benchmark and evaluation protocol that separately assesses whether memory contains gap-resolving evidence and whether the generated summary reflects it. We propose ReMEMBER, a missing-evidence memory framework that conditions retrieval on unresolved window dependencies and refines retrieved chunks into evidence-dense memory under a fixed budget. Experiments on dialogues with histories up to 160K tokens show that ReMEMBER improves memory recall and gap-resolution completeness over memory construction baselines under the same budget.

Code large language models (LLMs) have made significant progress in code debugging by directly generating the correct code based on the buggy code snippet. Programming benchmarks, typically consisting of buggy code snippet and their associated test cases, are used to assess the debugging capabilities of LLMs. However, many existing benchmarks primarily focus on Python and are often limited in terms of language diversity (e.g., DebugBench and DebugEval). To advance the field of multilingual debugging with LLMs, we propose the first massively multilingual debugging benchmark, which includes 3.6K test samples of 18 programming languages and covers the automated program repair (APR) task, the code review (CR) task, and the bug identification (BI) task. Further, we introduce the debugging instruction corpora MDEVAL-INSTRUCT by injecting bugs into the correct multilingual queries and solutions (xDebugGen). Further, a multilingual debugger xDebugCoder trained on MDEVAL-INSTRUCT as a strong baseline specifically to handle the bugs of a wide range of programming languages (e.g. "Missing Mut" in language Rust and "Misused Macro Definition" in language C). Our extensive experiments on MDEVAL reveal a notable performance gap between open-source models and closed-source LLMs (e.g., GPT and Claude series), highlighting huge room for improvement in multilingual code debugging scenarios.

Code debugging is a vital stage of software development, essential for ensuring the reliability and performance of Large Language Models (LLMs) in the code generation task. Human debugging typically follows a multi-stage process, which includes Bug Localization, Bug Identification, Code Repair, and Code Recognition. However, existing code debugging benchmarks predominantly focus on the Code Repair stage, which offers only a limited perspective on evaluating the debugging capabilities of LLMs. In this paper, we introduce DEBUGEVAL, a comprehensive benchmark for evaluating the debugging abilities of LLMs by emulating the multi-stage human debugging process. Through evaluating on DEBUGEVAL, we observe that 7B-scale models consistently underperform compared to their larger counterparts, highlighting their limitations in comprehending code semantics. In this case, we propose the COmmunicative Agent-based data SynThesis (COAST) framework, which employs a multi-agent system to generate high-quality training data for supervised fine-tuning (SFT). Experimental results demonstrate that COAST-generated data outperform human-curated and GPT-4-generated data, enabling 7B-scale LLMs to achieve debugging performance comparable to GPT-3.5. All data and codes are available at https://github.com/NEUIR/COAST.

Large language models (LLMs) have shown significant advancements in code generation, but still face challenges on tasks beyond their basic capabilities. Recently, the notion of self-debugging has been proposed to boost the performance of code generation by leveraging execution feedback from tests. Despite its promise, the availability of high-quality tests in real-world scenarios is limited. In this context, self-debugging with self-generated tests is a promising solution but lacks a full exploration of its limitations and practical potential. Therefore, we investigate its efficacy on diverse programming problems. To deepen our understanding, we propose two distinct paradigms for the process: post-execution and in-execution self-debugging. Within the scope of self-contained Python programming tasks, we find that post-execution self-debugging struggles on basic problems but shows potential for improvement on competitive ones, due to the bias introduced by self-generated tests. On the other hand, in-execution self-debugging enables LLMs to mitigate the bias by solely leveraging intermediate states during execution, thereby enhancing code generation.

Long-term memory systems store what a user says in an external store and retrieve it when a related query arrives. This interface rests on an assumption so natural that it is rarely stated: a memory that is needed will resemble the query that needs it. World knowledge breaks the assumption. A tree-nut allergy should change the answer to a macaron request through their almond-flour ingredient, yet the two texts share no cue a retriever can see. We call this failure mode the implicit-association blind spot and introduce InMind, a 125-task, expert-verified benchmark spanning ten life domains, with 113 tasks grounded in citable public sources. Its paired controls separate three explanations that existing evaluations conflate: the fact was never stored, the model lacks the bridging knowledge, or the fact was stored and never surfaced. The verdict is clean. With the decisive memory placed in context, the backbone answers 84.0 percent of indirect queries; when the same memory must be retrieved, six vector, graph, and agentic memory systems reach at most 14.4 percent, even though they recall the same facts on demand at up to 100 percent. An embedding with eight times the dimensionality raises answer-blind target recall for every system yet leaves the gap essentially intact. A minimal diagnostic probe that keeps memory visible before the query arrives recovers most of the gap, locating the failure in the query-conditioned interface itself and pointing to routing, deciding which facts must stay visible, as the open problem InMind is built to score.

While large language models have made significant strides in code generation, the pass rate of the generated code is bottlenecked on subtle errors, often requiring human intervention to pass tests, especially for complex problems. Existing LLM-based debugging systems treat generated programs as monolithic units, failing to address bugs at multiple levels of granularity, from low-level syntax errors to high-level algorithmic flaws. In this paper, we introduce Multi-Granularity Debugger (MGDebugger), a hierarchical code debugger by isolating, identifying, and resolving bugs at various levels of granularity. MGDebugger decomposes problematic code into a hierarchical tree structure of subfunctions, with each level representing a particular granularity of error. During debugging, it analyzes each subfunction and iteratively resolves bugs in a bottom-up manner. To effectively test each subfunction, we propose an LLM-simulated Python executor, which traces code execution and tracks important variable states to pinpoint errors accurately. Extensive experiments demonstrate that MGDebugger outperforms existing debugging systems, achieving an 18.9% improvement in accuracy over seed generations in HumanEval and a 97.6% repair success rate in HumanEvalFix. Furthermore, MGDebugger effectively fixes bugs across different categories and difficulty levels, demonstrating its robustness and effectiveness.

A fundamental skill among human developers is the ability to understand and reason about program execution. As an example, a programmer can mentally simulate code execution in natural language to debug and repair code (aka. rubber duck debugging). However, large language models (LLMs) of code are typically trained on the surface textual form of programs, thus may lack a semantic understanding of how programs execute at run-time. To address this issue, we propose NExT, a method to teach LLMs to inspect the execution traces of programs (variable states of executed lines) and reason about their run-time behavior through chain-of-thought (CoT) rationales. Specifically, NExT uses self-training to bootstrap a synthetic training set of execution-aware rationales that lead to correct task solutions (e.g., fixed programs) without laborious manual annotation. Experiments on program repair tasks based on MBPP and HumanEval demonstrate that NExT improves the fix rate of a PaLM 2 model, by 26.1% and 14.3% absolute, respectively, with significantly improved rationale quality as verified by automated metrics and human raters. Our model can also generalize to scenarios where program traces are absent at test-time.

Visual programs are executable code generated by large language models to address visual reasoning problems. They decompose complex questions into multiple reasoning steps and invoke specialized models for each step to solve the problems. However, these programs are prone to logic errors, with our preliminary evaluation showing that 58% of the total errors are caused by program logic errors. Debugging complex visual programs remains a major bottleneck for visual reasoning. To address this, we introduce VDebugger, a novel critic-refiner framework trained to localize and debug visual programs by tracking execution step by step. VDebugger identifies and corrects program errors leveraging detailed execution feedback, improving interpretability and accuracy. The training data is generated through an automated pipeline that injects errors into correct visual programs using a novel mask-best decoding technique. Evaluations on six datasets demonstrate VDebugger's effectiveness, showing performance improvements of up to 3.2% in downstream task accuracy. Further studies show VDebugger's ability to generalize to unseen tasks, bringing a notable improvement of 2.3% on the unseen COVR task. Code, data and models are made publicly available at https://github.com/shirley-wu/vdebugger/

This paper presents LLM4SecHW, a novel framework for hardware debugging that leverages domain specific Large Language Model (LLM). Despite the success of LLMs in automating various software development tasks, their application in the hardware security domain has been limited due to the constraints of commercial LLMs and the scarcity of domain specific data. To address these challenges, we propose a unique approach to compile a dataset of open source hardware design defects and their remediation steps, utilizing version control data. This dataset provides a substantial foundation for training machine learning models for hardware. LLM4SecHW employs fine tuning of medium sized LLMs based on this dataset, enabling the identification and rectification of bugs in hardware designs. This pioneering approach offers a reference workflow for the application of fine tuning domain specific LLMs in other research areas. We evaluate the performance of our proposed system on various open source hardware designs, demonstrating its efficacy in accurately identifying and correcting defects. Our work brings a new perspective on automating the quality control process in hardware design.

Code contains security and functional bugs. The process of identifying and localizing them is difficult and relies on human labor. In this work, we present a novel approach (FLAG) to assist human debuggers. FLAG is based on the lexical capabilities of generative AI, specifically, Large Language Models (LLMs). Here, we input a code file then extract and regenerate each line within that file for self-comparison. By comparing the original code with an LLM-generated alternative, we can flag notable differences as anomalies for further inspection, with features such as distance from comments and LLM confidence also aiding this classification. This reduces the inspection search space for the designer. Unlike other automated approaches in this area, FLAG is language-agnostic, can work on incomplete (and even non-compiling) code and requires no creation of security properties, functional tests or definition of rules. In this work, we explore the features that help LLMs in this classification and evaluate the performance of FLAG on known bugs. We use 121 benchmarks across C, Python and Verilog; with each benchmark containing a known security or functional weakness. We conduct the experiments using two state of the art LLMs in OpenAI's code-davinci-002 and gpt-3.5-turbo, but our approach may be used by other models. FLAG can identify 101 of the defects and helps reduce the search space to 12-17% of source code.

While inference-time scaling enables LLMs to carry out increasingly long and capable reasoning traces, the patterns and insights uncovered during these traces are immediately discarded once the context window is reset for a new query. External memory is a natural way to persist these discoveries, and recent work has shown clear benefits for reasoning-intensive tasks. We see an opportunity to make such memories more broadly reusable and scalable by moving beyond instance-based memory entries (e.g. exact query/response pairs, or summaries tightly coupled with the original problem context) toward concept-level memory: reusable, modular abstractions distilled from solution traces and stored in natural language. For future queries, relevant concepts are selectively retrieved and integrated into the prompt, enabling test-time continual learning without weight updates. Our design introduces new strategies for abstracting takeaways from rollouts and retrieving entries for new queries, promoting reuse and allowing memory to expand with additional experiences. We evaluate on ARC-AGI, a benchmark that stresses compositional generalization and abstract reasoning, making it a natural fit for concept memory. Our method yields a 7.5% relative gain over a strong no-memory baseline with performance continuing to scale with inference compute. We find abstract concepts to be the most consistent memory design, outscoring the baseline at all tested inference compute scales. Moreover, dynamically updating memory during test-time outperforms fixed settings, supporting the hypothesis that accumulating and abstracting patterns enables further solutions in a form of self-improvement. Code is available at https://github.com/matt-seb-ho/arc_memo.

Large language model (LLM) agents increasingly rely on external memory systems to remain consistent across long-horizon interactions, but little empirical work has been done to understand the specific failure modes and design choices that these systems present. Existing benchmarks report aggregate question-answering accuracy and treat memory systems as black boxes, making it impossible to attribute an incorrect answer to a particular failure mode of the system. We introduce MemFail, a diagnostic benchmark that isolates the failure modes of modern LLM memory systems. We begin by formalizing memory systems as the composition of three canonical operations -- summarization, storage, and retrieval -- and identify the potential failure modes induced by each. Based on these hypothesized failure modes, we construct five datasets spanning four tasks, each adversarially designed to test a specific operation of a memory system. Using these datasets, we evaluate four state-of-the-art memory systems on MemFail and demonstrate how MemFail can be used to empirically understand the tradeoffs induced by differences in memory system architectures.

Recent works on context and memory benchmarking have primarily focused on conversational instances but the need for evaluating memory in dynamic enterprise environments is crucial for its effective application. We introduce MEMTRACK, a benchmark designed to evaluate long-term memory and state tracking in multi-platform agent environments. MEMTRACK models realistic organizational workflows by integrating asynchronous events across multiple communication and productivity platforms such as Slack, Linear and Git. Each benchmark instance provides a chronologically platform-interleaved timeline, with noisy, conflicting, cross-referring information as well as potential codebase/file-system comprehension and exploration. Consequently, our benchmark tests memory capabilities such as acquistion, selection and conflict resolution. We curate the MEMTRACK dataset through both manual expert driven design and scalable agent based synthesis, generating ecologically valid scenarios grounded in real world software development processes. We introduce pertinent metrics for Correctness, Efficiency, and Redundancy that capture the effectiveness of memory mechanisms beyond simple QA performance. Experiments across SoTA LLMs and memory backends reveal challenges in utilizing memory across long horizons, handling cross-platform dependencies, and resolving contradictions. Notably, the best performing GPT-5 model only achieves a 60\% Correctness score on MEMTRACK. This work provides an extensible framework for advancing evaluation research for memory-augmented agents, beyond existing focus on conversational setups, and sets the stage for multi-agent, multi-platform memory benchmarking in complex organizational settings

Most evaluations of External Memory Module assume a static setting: memory is built offline and queried at a fixed state. In practice, memory is streaming: new facts arrive continuously, insertions interleave with retrievals, and the memory state evolves while the model is serving queries. In this regime, accuracy and cost are governed by the full memory lifecycle, which encompasses the ingestion, maintenance, retrieval, and integration of information into generation. We present Neuromem, a scalable testbed that benchmarks External Memory Modules under an interleaved insertion-and-retrieval protocol and decomposes its lifecycle into five dimensions including memory data structure, normalization strategy, consolidation policy, query formulation strategy, and context integration mechanism. Using three representative datasets LOCOMO, LONGMEMEVAL, and MEMORYAGENTBENCH, Neuromem evaluates interchangeable variants within a shared serving stack, reporting token-level F1 and insertion/retrieval latency. Overall, we observe that performance typically degrades as memory grows across rounds, and time-related queries remain the most challenging category. The memory data structure largely determines the attainable quality frontier, while aggressive compression and generative integration mechanisms mostly shift cost between insertion and retrieval with limited accuracy gain.

Current approaches to program synthesis with Large Language Models (LLMs) exhibit a "near miss syndrome": they tend to generate programs that semantically resemble the correct answer (as measured by text similarity metrics or human evaluation), but achieve a low or even zero accuracy as measured by unit tests due to small imperfections, such as the wrong input or output format. This calls for an approach known as Synthesize, Execute, Debug (SED), whereby a draft of the solution is generated first, followed by a program repair phase addressing the failed tests. To effectively apply this approach to instruction-driven LLMs, one needs to determine which prompts perform best as instructions for LLMs, as well as strike a balance between repairing unsuccessful programs and replacing them with newly generated ones. We explore these trade-offs empirically, comparing replace-focused, repair-focused, and hybrid debug strategies, as well as different template-based and model-based prompt-generation techniques. We use OpenAI Codex as the LLM and Program Synthesis Benchmark 2 as a database of problem descriptions and tests for evaluation. The resulting framework outperforms both conventional usage of Codex without the repair phase and traditional genetic programming approaches.

Automatically repairing software issues remains a fundamental challenge at the intersection of software engineering and AI. Although recent advancements in Large Language Models (LLMs) have demonstrated potential for repository-level repair tasks, current methodologies exhibit two notable limitations: (1) they often address issues in isolation, neglecting to incorporate insights from previously resolved issues, and (2) they rely on static and rigid prompting strategies, which constrain their ability to generalize across diverse and evolving issue scenarios. Inspired by the dual memory systems of human cognition, where episodic and semantic memories work synergistically to support human reasoning and decision-making, we propose ExpeRepair, a novel LLM-based approach that continuously learns from historical repair experiences through dual-channel knowledge accumulation. ExpeRepair organizes historical repair experiences into two complementary memories: an episodic memory that stores concrete repair demonstrations, and a semantic memory that encodes abstract reflective insights. At inference time, ExpeRepair activates both memory systems by retrieving relevant demonstrations from episodic memory and recalling high-level repair insights from semantic memory. It further enhances adaptability through dynamic prompt composition, synergistically integrating both memory types to replace static prompts with context-aware, experience-driven prompts. Experiments on the SWE-bench Lite benchmark demonstrate that ExpeRepair achieves a pass@1 score of 49.3% with Claude 3.7 Sonnet, outperforming all state-of-the-art open-source methods.

Current mobile GUI agent benchmarks systematically fail to assess memory capabilities, with only 5.2-11.8% memory-related tasks and no cross-session learning evaluation. We introduce MemGUI-Bench, a comprehensive memory-centric benchmark with pass@k and staged LLM-as-judge evaluation. Our contributions include: (1) a systematic memory taxonomy analyzing 11 agents across 5 architectures; (2) 128 tasks across 26 applications where 89.8% challenge memory through cross-temporal and cross-spatial retention; (3) MemGUI-Eval, an automated pipeline with Progressive Scrutiny and 7 hierarchical metrics; and (4) RQ-driven assessment of 11 state-of-the-art agents. Our experiments reveal significant memory deficits across all evaluated systems, identify 5 distinct failure modes, and synthesize 5 actionable design implications. All resources including code, benchmark, and evaluation results will be \textit{fully open-sourced and continuously maintained} at https://lgy0404.github.io/MemGUI-Bench/.

Tremendous efforts have been devoted to automating software debugging, a time-consuming process involving fault localization and repair generation. Recently, Large Language Models (LLMs) have shown great potential in automated debugging. However, we identified three challenges posed to traditional and LLM-based debugging tools: 1) the upstream imperfection of fault localization affects the downstream repair, 2) the deficiency in handling complex logic errors, and 3) the ignorance of program contexts. In this context, we propose the first automated, unified debugging framework, FixAgent, via LLM agent synergy. FixAgent can perform end-to-end localization, repair, and analysis of bugs. Our insight is that LLMs can benefit from general software engineering principles recognized by human developers in debugging, such as rubber duck debugging, enabling a better understanding of program functionality and logic bugs. Hence, we create three designs inspired by rubber ducking to address these challenges. They are agent specialization and synergy, key variable tracking, and program context comprehension, which request LLMs to provide explicit explanations and force them to focus on crucial program logic information. Experiments on the widely used dataset QuixBugs show that FixAgent correctly fixes 79 out of 80 bugs, 9 of which have never been fixed. It also plausibly patches 1.9X more defects than the best-performing repair tool on CodeFlaws, even with no bug location information and fewer than 0.6% sampling times. On average, FixAgent increases about 20% plausible and correct fixes compared to its base model using different LLMs, showing the effectiveness of our designs. Moreover, the correctness rate of FixAgent reaches remarkably 97.26%, indicating that FixAgent can potentially overcome the overfitting issue of the existing approaches.

The effectiveness of AI debugging follows a predictable exponential decay pattern; most models lose 60-80% of their debugging capability within just 2-3 attempts, despite iterative debugging being a critical capability for practical code generation systems. We introduce the Debugging Decay Index (DDI), a mathematical framework that quantifies when debugging becomes ineffective and predicts intervention points. Our strategic fresh start approach shifts from exploitation to exploration at strategic points in the debugging process, demonstrating that well-timed interventions can rescue the effectiveness of debugging. DDI reveals a fundamental limitation in current AI debugging and provides the first quantitative framework for optimising iterative code generation strategies.

Large Language Models (LLMs) have exhibited significant proficiency in code debugging, especially in automatic program repair, which may substantially reduce the time consumption of developers and enhance their efficiency. Significant advancements in debugging datasets have been made to promote the development of code debugging. However, these datasets primarily focus on assessing the LLM's function-level code repair capabilities, neglecting the more complex and realistic repository-level scenarios, which leads to an incomplete understanding of the LLM's challenges in repository-level debugging. While several repository-level datasets have been proposed, they often suffer from limitations such as limited diversity of tasks, languages, and error types. To mitigate this challenge, this paper introduces RepoDebug, a multi-task and multi-language repository-level code debugging dataset with 22 subtypes of errors that supports 8 commonly used programming languages and 3 debugging tasks. Furthermore, we conduct evaluation experiments on 10 LLMs, where Claude 3.5 Sonnect, the best-performing model, still cannot perform well in repository-level debugging.

In the domain of code generation, self-debugging is crucial. It allows LLMs to refine their generated code based on execution feedback. This is particularly important because generating correct solutions in one attempt proves challenging for complex tasks. Prior works on self-debugging mostly focus on prompting methods by providing LLMs with few-shot examples, which work poorly on small open-sourced LLMs. In this work, we propose a training framework that significantly improves self-debugging capability of LLMs. Intuitively, we observe that a chain of explanations on the wrong code followed by code refinement helps LLMs better analyze the wrong code and do refinement. We thus propose an automated pipeline to collect a high-quality dataset for code explanation and refinement by generating a number of explanations and refinement trajectories and filtering via execution verification. We perform supervised fine-tuning (SFT) and further reinforcement learning (RL) on both success and failure trajectories with a novel reward design considering code explanation and refinement quality. SFT improves the pass@1 by up to 15.92% and pass@10 by 9.30% over four benchmarks. RL training brings additional up to 3.54% improvement on pass@1 and 2.55% improvement on pass@10. The trained LLMs show iterative refinement ability, and can keep refining code continuously. Lastly, our human evaluation shows that the LLMs trained with our framework generate more useful code explanations and help developers better understand bugs in source code.

Long-term memory has become a foundational capability for LLM-based agents that accompany users across extended, multi-session interactions. Existing benchmarks, however, evaluate such memory almost exclusively through downstream question answering, scoring only the correctness of a final answer. This black-box formulation conflates the heterogeneous causes of memory failure, such as missing the introduction of a relevant fact, binding an operation to the wrong target, or relying on stale values after a correction. As a result, it can credit correct answers despite their reliance on inconsistent or unsafe memory states. In this paper, we argue that, in dynamic long-horizon interactions, memory is not a static collection of facts but a lifecycle of explicit operations, including remembering, forgetting, updating, reflecting, and their compositions. We introduce MemOps, a benchmark that reformulates conversational memory as a sequence of lifecycle operations and represents each memory event with a structured trace specifying its trigger, target, scope, state transition, and supporting evidence. A controllable generation pipeline embeds these operations into long, task-oriented conversations and produces gold operation traces together with six categories of operation-level probes, evaluated under both adjacent-evidence and long-context settings. Across long-context, retrieval-based, parametric and managed-memory systems, MemOps disentangles failure modes that final-answer accuracy alone conceals, revealing that current systems remain far from uniformly reliable. For instance, session-level retrieval outperforms turn-level retrieval, and long-context models remain notably weak at reconstructing ordered memory-state trajectories. These results move long-term memory evaluation from final-answer scoring toward interpretable, operation-level diagnosis.

Memory-augmented LLM agents typically answer queries by retrieving relevant memories and feeding them directly to an answer model. This retrieval-as-evidence paradigm assumes retrieved memories are already suitable for reasoning, leaving the answer model to resolve redundancy, conflicts, and weak relevance while incurring substantial context overhead in long-term memory tasks. We propose MemChain, a trainable post-retrieval memory policy that transforms retrieved candidates into answer-facing active memory, represented as a compact and grounded evidence context. Given a user query and retrieved candidates, MemChain first generates a question-conditioned evidence plan, then constructs an ordered grounded evidence trace that organizes retrieved memories according to their semantic roles and dependencies, and finally executes explicit memory actions to produce a concise evidence context for answer generation. To train the mediator, we introduce a two-stage learning framework. Supervised trace learning first teaches the policy to generate structurally valid plans, traces, actions, and evidence contexts. We then propose Trace-Guided Memory Policy Optimization (TMPO), a reinforcement learning objective that optimizes the memory policy using downstream answer quality while jointly encouraging trace grounding, evidence support, structural validity, and answer stability across multiple rollouts. Experiments on LoCoMo and LongMemEval-S demonstrate that MemChain consistently achieves state-of-the-art performance across both closed-source and open-weight frozen answer models while substantially reducing the memory context passed to the answer model.

Large language model agents rely on specialized memory systems to accumulate and reuse knowledge during extended interactions. Recent architectures typically adopt a fixed memory design tailored to specific domains, such as semantic retrieval for conversations or skills reused for coding. However, a memory system optimized for one purpose frequently fails to transfer to others. To address this limitation, we introduce M^star, a method that automatically discovers task-optimized memory harnesses through executable program evolution. Specifically, M^star models an agent memory system as a memory program written in Python. This program encapsulates the data Schema, the storage Logic, and the agent workflow Instructions. We optimize these components jointly using a reflective code evolution method; this approach employs a population-based search strategy and analyzes evaluation failures to iteratively refine the candidate programs. We evaluate M^star on four distinct benchmarks spanning conversation, embodied planning, and expert reasoning. Our results demonstrate that M^star improves performance over existing fixed-memory baselines robustly across all evaluated tasks. Furthermore, the evolved memory programs exhibit structurally distinct processing mechanisms for each domain. This finding indicates that specializing the memory mechanism for a given task explores a broad design space and provides a superior solution compared to general-purpose memory paradigms.

Code agents are advancing rapidly, but debugging them is becoming increasingly difficult. As frameworks orchestrate parallel tool calls and multi-stage workflows over complex tasks, making the agent's state transitions and error propagation hard to observe. In these runs, an early misstep can trap the agent in unproductive loops or even cascade into fundamental errors, forming hidden error chains that make it hard to tell when the agent goes off track and why. Existing agent tracing analyses either focus on simple interaction or rely on small-scale manual inspection, which limits their scalability and usefulness for real coding workflows. We present CodeTracer, a tracing architecture that parses heterogeneous run artifacts through evolving extractors, reconstructs the full state transition history as a hierarchical trace tree with persistent memory, and performs failure onset localization to pinpoint the failure origin and its downstream chain. To enable systematic evaluation, we construct CodeTraceBench from a large collection of executed trajectories generated by four widely used code agent frameworks on diverse code tasks (e.g., bug fixing, refactoring, and terminal interaction), with supervision at both the stage and step levels for failure localization. Experiments show that CodeTracer substantially outperforms direct prompting and lightweight baselines, and that replaying its diagnostic signals consistently recovers originally failed runs under matched budgets. Our code and data are publicly available.

Automatic program repair seeks to generate correct code from buggy programs, with most approaches searching the correct program in a discrete, symbolic space of source code tokens. This symbolic search is fundamentally limited by its inability to directly reason about program behavior. We introduce Gradient-Based Program Repair (GBPR), a new paradigm that reframes program repair as continuous optimization in a differentiable numerical program space. Our core insight is to compile symbolic programs into differentiable numerical representations, enabling search in the numerical program space directly guided by program behavior. To evaluate GBPR, we present RaspBugs, a new benchmark of 1,466 buggy symbolic RASP programs and their respective numerical representations. Our experiments demonstrate that GBPR can effectively repair buggy symbolic programs by gradient-based optimization in the numerical program space, with convincing repair trajectories. To our knowledge, we are the first to state program repair as continuous optimization in a numerical program space. Our work establishes a new direction for program repair research, bridging two rich worlds: continuous optimization and program behavior.

Large Language Models (LLMs) have made significant strides in code generation and problem solving. Current approaches employ external tool-based iterative debuggers that use compiler or other tool-based runtime feedback to refine coarse programs generated by various methods. However, the effectiveness of these approaches heavily relies on the quality of the initial code generation, which remains an open challenge. In this paper, we introduce CodeSim, a novel multi-agent code generation framework that comprehensively addresses the stages of program synthesis-planning, coding, and debugging-through a human-like perception approach. As human verifies their understanding of any algorithms through visual simulation, CodeSim uniquely features a method of plan verification and internal debugging through the step-by-step simulation of input/output. Extensive experiments across seven challenging competitive problem-solving and program synthesis benchmarks demonstrate CodeSim's remarkable code generation capabilities. Our framework achieves new state-of-the-art (pass@1) results-(HumanEval 95.1%, MBPP 90.7%, APPS 22%, and CodeContests 29.1%). Furthermore, our method shows potential for even greater enhancement when cascaded with external debuggers. To facilitate further research and development in this area, we have open-sourced our framework in this link (https://kagnlp.github.io/codesim.github.io/).

LLM agents need memory to act consistently over long interactions, yet many systems use additional LLM calls to operate that memory. Generating intermediate records and mediating their retrieval adds recurring token and time costs, while omitted or merged details can obscure the original evidence. We ask whether structured memory access requires generation at all. Zero-Mem introduces zero-token memory operations: no step outside final question answering invokes an LLM or consumes LLM input or output tokens; encoder computation is accounted for separately. Zero-Mem preserves original interaction traces as its source of record. It organizes the traces in two complementary ways. An entity--context graph exposes connections across interactions, while a temporal hierarchy preserves conversational locality and session state. For each query, Zero-Mem weighs the two views, retrieves from both, and follows their structure to recover supporting relations or surrounding context. Deterministic calibration first discards conflicting evidence and then keeps the reader's answer grounded in the retrieved traces. Only the final-QA reader invokes an LLM. Across long-memory and long-context question-answering benchmarks, Zero-Mem achieves competitive performance while eliminating LLM calls and LLM-token consumption from memory operations. With the same final-QA reader and context budget, it reduces memory-operation time cost by 57.6\% relative to the fastest compared baseline. Ablations support the contribution of the two views and their query-dependent coordination. Overall, the results show that structured agent memory need not generate an intermediate representation of the past. After peer review, the code and implementation details will be available at blue{https://github.com/TheMoon0815/Zero-mem}.

Large language models (LLMs) have enabled powerful software engineering (SE) agents capable of navigating complex codebases and resolving real-world issues. However, these agents remain fundamentally episodic: they fail to retain, refine, and reuse experiences across tasks, repeatedly reconstructing context from scratch and reproducing similar mistakes. Even with memory support, they offer no remedy for the absence of a principled, task-agnostic memory utility, making them difficult to evaluate rigorously or generalize across agents and settings. To tackle these limitations, we introduce \ours, a closed-loop framework for memory augmentation in SE agents. \ours grounds memory utility in validated downstream impact, establishing utility as both a task-agnostic evaluation benchmark and an annotation-free optimization signal. Through complementary evaluation on single-episode and cross-episode memory augmentation, results demonstrate that \ours consistently improves SE agents across settings, achieving absolute gains of up to uparrow5.25% in success rate and uparrow4.63% in resolve efficiency, while substantially reducing computational cost by geq9.79%. Our project page: https://xhguo7.github.io/MemOp/{https://xhguo7.github.io/MemOp/}.

Existing works increasingly adopt memory-centric mechanisms to process long contexts in a segment manner, and effective memory management is one of the key capabilities that enables large language models to effectively propagate information across the entire sequence. Therefore, leveraging reward models (RMs) to automatically and reliably evaluate memory quality is critical. In this work, we introduce MemoryRewardBench, the first benchmark to systematically study the ability of RMs to evaluate long-term memory management processes. MemoryRewardBench covers both long-context comprehension and long-form generation tasks, featuring 10 distinct settings with different memory management patterns, with context length ranging from 8K to 128K tokens. Evaluations on 13 cutting-edge RMs indicate a diminishing performance gap between open-source and proprietary models, with newer-generation models consistently outperforming their predecessors regardless of parameter count. We further expose the capabilities and fundamental limitations of current RMs in evaluating LLM memory management across diverse settings.

In modern Very Large Scale Integrated (VLSI) circuit design flow, the Register-Transfer Level (RTL) stage presents a critical opportunity for timing optimization. Addressing timing violations at this early stage is essential, as modern systems demand higher speeds, where even minor timing violations can lead to functional failures or system crashes. However, traditional timing optimization heavily relies on manual expertise, requiring engineers to iteratively analyze timing reports and debug. To automate this process, this paper proposes ViTAD, a method that efficiently analyzes the root causes of timing violations and dynamically generates targeted repair strategies. Specifically, we first parse Verilog code and timing reports to construct a Signal Timing Dependency Graph (STDG). Based on the STDG, we perform violation path analysis and use large language models (LLMs) to infer the root causes of violations. Finally, by analyzing the causes of violations, we selectively retrieve relevant debugging knowledge from a domain-specific knowledge base to generate customized repair solutions. To evaluate the effectiveness of our method, we construct a timing violation dataset based on real-world open-source projects. This dataset contains 54 cases of violations. Experimental results show that our method achieves a 73.68% success rate in repairing timing violations, while the baseline using only LLM is 54.38%. Our method improves the success rate by 19.30%.

Large Language Models (LLMs) are increasingly used in working environments for a wide range of tasks, excelling at solving individual problems in isolation. However, are they also able to effectively collaborate over long-term interactions? To investigate this, we introduce MemoryCode, a synthetic multi-session dataset designed to test LLMs' ability to track and execute simple coding instructions amid irrelevant information, simulating a realistic setting. While all the models we tested handle isolated instructions well, even the performance of state-of-the-art models like GPT-4o deteriorates when instructions are spread across sessions. Our analysis suggests this is due to their failure to retrieve and integrate information over long instruction chains. Our results highlight a fundamental limitation of current LLMs, restricting their ability to collaborate effectively in long interactions.

Persistent AI assistants, such as OpenClaw, accumulate large collections of related memories over long-term interactions. As these memories grow, they may reinforce one another, diverge across contexts, or directly conflict, making correct assistance depend on memory relations rather than isolated recall. Existing long-term memory benchmarks rarely probe how agents preserve and utilize such relations during downstream tasks. To address this gap, we introduce SubtleMemory, a benchmark for fine-grained relational memory discrimination in long-running AI agents. SubtleMemory constructs relation-controlled latent semantic artifacts whose variants instantiate complementary, nuanced, or contradictory relations, and embeds them into realistic user-agent histories, requiring agents to recover distributed relational structures during later queries and instructions. The benchmark contains 1,522 evaluation instances over 10 long histories, grounded in 1,090 relation-controlled memory-variant sets and spanning user-related and non-user-related queries. Evaluating six standalone memory systems, two Claw-style agents with native memory modules, and three Claw-style agents with plugin memory modules, we find that current systems remain weak on fine-grained relational memory discrimination. We further introduce diagnostic protocols that reveal distinct capability profiles across memory preservation, retrieval, and downstream reasoning stages.

Large Language Model (LLM)-based Multi-Agent Systems (MAS) enable complex problem-solving but introduce significant debugging challenges, characterized by long interaction traces, inter-agent dependencies, and delayed error manifestation. Existing diagnostic approaches often rely on expensive expert annotation or ''LLM-as-a-judge'' paradigms, which struggle to pinpoint decisive error steps within extended contexts. In this paper, we introduce ErrorProbe, a self-improving framework for semantic failure attribution that identifies responsible agents and the originating error step. The framework operates via a three-stage pipeline: (1) operationalizing the MAS failure taxonomy to detect local anomalies, (2) performing symptom-driven backward tracing to prune irrelevant context, and (3) employing a specialized multi-agent team (Strategist, Investigator, Arbiter) to validate error hypotheses through tool-grounded execution. Crucially, ErrorProbe maintains a verified episodic memory that updates only when error patterns are confirmed by executable evidence, without the need for annotation. Experiments across the TracerTraj and Who&When benchmarks demonstrate that ErrorProbe significantly outperforms baselines, particularly in step-level localization, while the verified memory enables robust cross-domain transfer without retraining.

Jupyter notebooks are widely used for machine learning (ML) prototyping. Yet few debugging tools are designed for ML code in notebooks, potentially due to the lack of benchmarks. We introduce JunoBench, the first benchmark dataset of real-world crashes in Python-based ML notebooks. JunoBench has 111 curated and reproducible crashes from public Kaggle notebooks, each paired with a verifiable fix, ranging over popular ML libraries, including TensorFlow/Keras, PyTorch, Scikit-learn, Pandas, and NumPy, as well as notebook-specific out-of-order execution issue. To support reproducibility and ease of use, JunoBench offers a unified execution environment where crashes and fixes can be reliably reproduced. By providing realistic crashes and their resolutions, JunoBench facilitates bug detection, localization, and repair tailored to the interactive and iterative nature of notebook-based ML development.

We introduce Memory-QA, a novel real-world task that involves answering recall questions about visual content from previously stored multimodal memories. This task poses unique challenges, including the creation of task-oriented memories, the effective utilization of temporal and location information within memories, and the ability to draw upon multiple memories to answer a recall question. To address these challenges, we propose a comprehensive pipeline, Pensieve, integrating memory-specific augmentation, time- and location-aware multi-signal retrieval, and multi-memory QA fine-tuning. We created a multimodal benchmark to illustrate various real challenges in this task, and show the superior performance of Pensieve over state-of-the-art solutions (up to 14% on QA accuracy).

Robotic manipulation policies have made rapid progress in recent years, yet most existing approaches give limited consideration to memory capabilities. Consequently, they struggle to solve tasks that require reasoning over historical observations and maintaining task-relevant information over time, which are common requirements in real-world manipulation scenarios. Although several memory-aware policies have been proposed, systematic evaluation of memory-dependent manipulation remains underexplored, and the relationship between architectural design choices and memory performance is still not well understood. To address this gap, we introduce RMBench, a simulation benchmark comprising 9 manipulation tasks that span multiple levels of memory complexity, enabling systematic evaluation of policy memory capabilities. We further propose Mem-0, a modular manipulation policy with explicit memory components designed to support controlled ablation studies. Through extensive simulation and real-world experiments, we identify memory-related limitations in existing policies and provide empirical insights into how architectural design choices influence memory performance. The website is available at https://rmbench.github.io/.

The availability of large-scale datasets, advanced architectures, and powerful computational resources have led to effective code models that automate diverse software engineering activities. The datasets usually consist of billions of lines of code from both open-source and private repositories. A code model memorizes and produces source code verbatim, which potentially contains vulnerabilities, sensitive information, or code with strict licenses, leading to potential security and privacy issues. This paper investigates an important problem: to what extent do code models memorize their training data? We conduct an empirical study to explore memorization in large pre-trained code models. Our study highlights that simply extracting 20,000 outputs (each having 512 tokens) from a code model can produce over 40,125 code snippets that are memorized from the training data. To provide a better understanding, we build a taxonomy of memorized contents with 3 categories and 14 subcategories. The results show that the prompts sent to the code models affect the distribution of memorized contents. We identify several key factors of memorization. Specifically, given the same architecture, larger models suffer more from memorization problems. A code model produces more memorization when it is allowed to generate longer outputs. We also find a strong positive correlation between the number of an output's occurrences in the training data and that in the generated outputs, which indicates that a potential way to reduce memorization is to remove duplicates in the training data. We then identify effective metrics that infer whether an output contains memorization accurately. We also make suggestions to deal with memorization.

LLMs are transforming software development, yet current code generation and code repair benchmarks mainly assess syntactic and functional correctness in simple, single-error cases. LLMs' capabilities to autonomously find and fix runtime logical errors in complex data science code remain largely unexplored. To address this gap, we introduce DSDBench: the Data Science Debugging Benchmark, the first benchmark for systematic evaluation of LLMs on multi-hop error tracing and multi-bug detection in data science code debugging. DSDBench adapts datasets from existing data science task benchmarks, such as DABench and MatPlotBench, featuring realistic data science debugging tasks with automatically synthesized multi-hop, multi-bug code snippets. DSDBench includes 1,117 annotated samples with 741 cause-effect error pairs and runtime error messages. Evaluations of state-of-the-art LLMs on DSDBench show significant performance gaps, highlighting challenges in debugging logical runtime errors in data science code. DSDBench offers a crucial resource to evaluate and improve LLMs' debugging and reasoning capabilities, enabling more reliable AI-assisted data science in the future. DSDBench is publicly available at github.com/KevinCL16/DSDBench.

Recently, multiple Automated Program Repair (APR) techniques based on Large Language Models (LLMs) have been proposed to enhance the repair performance. While these techniques mainly focus on the single-line or hunk-level repair, they face significant challenges in real-world application due to the limited repair task scope and costly statement-level fault localization. However, the more practical function-level APR, which broadens the scope of APR task to fix entire buggy functions and requires only cost-efficient function-level fault localization, remains underexplored. In this paper, we conduct the first comprehensive study of LLM-based function-level APR including investigating the effect of the few-shot learning mechanism and the auxiliary repair-relevant information. Specifically, we adopt six widely-studied LLMs and construct a benchmark in both the Defects4J 1.2 and 2.0 datasets. Our study demonstrates that LLMs with zero-shot learning are already powerful function-level APR techniques, while applying the few-shot learning mechanism leads to disparate repair performance. Moreover, we find that directly applying the auxiliary repair-relevant information to LLMs significantly increases function-level repair performance. Inspired by our findings, we propose an LLM-based function-level APR technique, namely SRepair, which adopts a dual-LLM framework to leverage the power of the auxiliary repair-relevant information for advancing the repair performance. The evaluation results demonstrate that SRepair can correctly fix 300 single-function bugs in the Defects4J dataset, largely surpassing all previous APR techniques by at least 85%, without the need for the costly statement-level fault location information. Furthermore, SRepair successfully fixes 32 multi-function bugs in the Defects4J dataset, which is the first time achieved by any APR technique ever to our best knowledge.

Transformer-based large language models (LLMs) are constrained by the fixed context window of the underlying transformer architecture, hindering their ability to produce long and coherent outputs. Memory-augmented LLMs are a promising solution, but current approaches cannot handle long output generation tasks since they (1) only focus on reading memory and reduce its evolution to the concatenation of new memories or (2) use very specialized memories that cannot adapt to other domains. This paper presents L2MAC, the first practical LLM-based general-purpose stored-program automatic computer (von Neumann architecture) framework, an LLM-based multi-agent system, for long and consistent output generation. Its memory has two components: the instruction registry, which is populated with a prompt program to solve the user-given task, and a file store, which will contain the final and intermediate outputs. Each instruction in turn is executed by a separate LLM agent, whose context is managed by a control unit capable of precise memory reading and writing to ensure effective interaction with the file store. These components enable L2MAC to generate extensive outputs, bypassing the constraints of the finite context window while producing outputs that fulfill a complex user-specified task. We empirically demonstrate that L2MAC achieves state-of-the-art performance in generating large codebases for system design tasks, significantly outperforming other coding methods in implementing the detailed user-specified task; we show that L2MAC works for general-purpose extensive text-based tasks, such as writing an entire book; and we provide valuable insights into L2MAC's performance improvement over existing methods.

We present MineNPC-Task, a user-authored benchmark and evaluation harness for testing memory-aware, mixed-initiative LLM agents in open-world Minecraft. Rather than relying on synthetic prompts, tasks are elicited through formative and summative co-play with expert players, then normalized into parametric templates with explicit preconditions and dependency structure. These tasks are paired with machine-checkable validators under a bounded-knowledge policy that forbids out-of-world shortcuts. The harness captures plan, action, and memory events, including plan previews, targeted clarifications, memory reads and writes, precondition checks, and repair attempts, and reports outcomes relative to the total number of attempted subtasks using only in-world evidence. As an initial snapshot, we instantiate the framework with GPT-4o and evaluate 216 subtasks across 8 experienced players. We observe recurring breakdown patterns in code execution, inventory and tool handling, referencing, and navigation, alongside successful recoveries supported by mixed-initiative clarifications and lightweight memory use. Participants rated interaction quality and interface usability positively, while noting the need for stronger memory persistence across tasks. We release the complete task suite, validators, logs, and evaluation harness to support transparent and reproducible evaluation of future memory-aware embodied agents.

Large Language Models (LLMs) can enhance reasoning capabilities through test-time scaling by generating multiple traces. However, the combination of lengthy reasoning traces with multiple sampling introduces substantial computation and high end-to-end latency. Prior work on accelerating this process has relied on similarity-based or confidence-based pruning, but these signals do not reliably indicate trace quality. To address these limitations, we propose STEP: Step-level Trace Evaluation and Pruning, a novel pruning framework that evaluates reasoning steps using hidden states and dynamically prunes unpromising traces during generation. We train a lightweight step scorer to estimate trace quality, and design a GPU memory-aware pruning strategy that triggers pruning as the GPU memory is saturated by KV cache to reduce end-to-end latency. Experiments across challenging reasoning benchmarks demonstrate that STEP reduces end-to-end inference latency by 45%-70% on average compared to self-consistency while also improving reasoning accuracy. Our code is released at: https://github.com/Supercomputing-System-AI-Lab/STEP

Large language models rely heavily on prompts to specify tasks, recall knowledge and guide reasoning. However, this reliance is inefficient as prompts must be re-read at each step, scale poorly across tasks, and lack mechanisms for modular reuse. We introduce TokMem, a tokenized procedural memory that stores recurring procedures as compact, trainable embeddings. Each memory token encodes both an address to a procedure and a control signal that steers generation, enabling targeted behavior with constant-size overhead. To support continual adaptation, TokMem keeps the backbone model frozen, allowing new procedures to be added without interfering with existing ones. We evaluate TokMem on 1,000 tasks for atomic recall, and on function-calling tasks for compositional recall, where it consistently outperforms retrieval-augmented generation while avoiding repeated context overhead, and fine-tuning with far fewer parameters. These results establish TokMem as a scalable and modular alternative to prompt engineering and fine-tuning, offering an explicit procedural memory for LLMs.

Memory systems have shown promise for improving agent performance, but their potential remains largely unexplored for small language models, which struggle to generate sufficient successful trajectories on their own. We propose Agent Memory Distillation (AMD), a training-free framework that transfers structured knowledge from a large teacher agent to a small student agent through hierarchical memory. AMD constructs three complementary memory types from successful teacher trajectories: Workflow memory encodes task-level strategies, Subtask memory provides concrete behavioral examples at an intermediate granularity, and Function memory captures per-function calling conventions and common pitfalls. Workflow and Subtask memories are injected proactively at the start of each task, while Function memory is retrieved reactively upon tool-calling errors. We evaluate AMD on three tool-use benchmarks using four student models (4B-8B parameters) with GPT-5-mini as the teacher, achieving average accuracy gains of 27.2%p, 11.2%p, and 3.4%p on AppWorld, BFCL V3, and ToolSandbox, while consistently outperforming existing memory-based baselines. Further analysis shows that Subtask memory contributes the largest gains, teacher effectiveness depends on both teacher capability and student compatibility, and 4B-sized students benefit most from AMD.

This paper provides a novel approach to reconciling complex low-level memory model features, such as pointer--integer casts, with desired refinements that are needed to justify the correctness of program transformations. The idea is to use a "two-phased" memory model, one with and unbounded memory and corresponding unbounded integer type, and one with a finite memory; the connection between the two levels is made explicit by our notion of refinement that handles out-of-memory behaviors. This approach allows for more optimizations to be performed and establishes a clear boundary between the idealized semantics of a program and the implementation of that program on finite hardware. To demonstrate the utility of this idea in practice, we instantiate the two-phase memory model in the context of Zakowski et al.'s VIR semantics, yielding infinite and finite memory models of LLVM IR, including low-level features like undef and bitcast. Both the infinite and finite models, which act as specifications, can provably be refined to executable reference interpreters. The semantics justify optimizations, such as dead-alloca-elimination, that were previously impossible or difficult to prove correct.

Transformer-based language models (LMs) track contextual information through large, hard-coded input windows. We introduce MemoryPrompt, a leaner approach in which the LM is complemented by a small auxiliary recurrent network that passes information to the LM by prefixing its regular input with a sequence of vectors, akin to soft prompts, without requiring LM finetuning. Tested on a task designed to probe a LM's ability to keep track of multiple fact updates, a MemoryPrompt-augmented LM outperforms much larger LMs that have access to the full input history. We also test MemoryPrompt on a long-distance dialogue dataset, where its performance is comparable to that of a model conditioned on the entire conversation history. In both experiments we also observe that, unlike full-finetuning approaches, MemoryPrompt does not suffer from catastrophic forgetting when adapted to new tasks, thus not disrupting the generalist capabilities of the underlying LM.

3D printing or additive manufacturing is a revolutionary technology that enables the creation of physical objects from digital models. However, the quality and accuracy of 3D printing depend on the correctness and efficiency of the G-code, a low-level numerical control programming language that instructs 3D printers how to move and extrude material. Debugging G-code is a challenging task that requires a syntactic and semantic understanding of the G-code format and the geometry of the part to be printed. In this paper, we present the first extensive evaluation of six state-of-the-art foundational large language models (LLMs) for comprehending and debugging G-code files for 3D printing. We design effective prompts to enable pre-trained LLMs to understand and manipulate G-code and test their performance on various aspects of G-code debugging and manipulation, including detection and correction of common errors and the ability to perform geometric transformations. We analyze their strengths and weaknesses for understanding complete G-code files. We also discuss the implications and limitations of using LLMs for G-code comprehension.

Episodic memory allows LLM agents to accumulate and retrieve experience, but current methods treat each memory independently, i.e., evaluating retrieval quality in isolation without accounting for the dependency chains through which memories enable the creation of future memories. We introduce MemQ, which applies TD(λ) eligibility traces to memory Q-values, propagating credit backward through a provenance DAG that records which memories were retrieved when each new memory was created. Credit weight decays as (γλ)^d with DAG depth d, replacing temporal distance with structural proximity. We formalize the setting as an Exogenous-Context MDP, whose factored transition decouples the exogenous task stream from the endogenous memory store. Across six benchmarks, spanning OS interaction, function calling, code generation, multimodal reasoning, embodied reasoning, and expert-level QA, MemQ achieves the highest success rate on all six in generalization evaluation and runtime learning, with gains largest on multi-step tasks that produce deep and relevant provenance chains (up to +5.7~pp) and smallest on single-step classification (+0.77~pp) where single-step updates already suffice. We further study how γ and λ interact with the EC-MDP structure, providing principled guidance for parameter selection and future research. Code is available at https://github.com/jwliao-ai/MemQ.

While significant progress has been made in automating various aspects of software development through coding agents, there is still significant room for improvement in their bug fixing capabilities. Debugging and investigation of runtime behavior remains largely a manual, developer-driven process. Popular coding agents typically rely on either static analysis of the code or iterative test-fix cycles, which is akin to trial and error debugging. We posit that there is a wealth of rich runtime information that developers routinely access while debugging code, which agents are currently deprived of due to design limitations. Despite how prevalent debuggers are in modern IDEs and command-line tools, they have surprisingly not made their way into coding agents. In this work, we introduce Debug2Fix, a novel framework that incorporates interactive debugging as a core component of a software engineering agent via a subagent architecture. We incorporate debuggers for Java and Python into our agent framework and evaluate against GitBug-Java and SWE-Bench-Live and achieve >20% improvement in performance compared to the baseline for certain models. Furthermore, using our framework, we're able to make weaker models like GPT-5 and Claude Haiku 4.5 match or exceed the performances of stronger models like Claude Sonnet 4.5, showing that better tool design is often just as important as switching to a more expensive model. Finally, we conduct systematic ablations demonstrating the importance of both the subagent architecture and debugger integration.

Memory-augmented large language models extend reasoning beyond a fixed context window by maintaining long-term memory across interactions. However, existing memory systems often collapse stable user facts, episodic events, and behavioral rules into a shared space, allowing functionally distinct memories to be retrieved and used as interchangeable evidence. We identify this failure mode as heterogeneous memory contamination, where context-specific events become overgeneralized claims, or semantically relevant but functionally incompatible memories mislead generation. To this end, we introduce MemGuard, a type-aware memory framework that preserves functional memory boundaries during memory construction and retrieval. It assigns each memory an explicit functional role at write time, maintains relations across type-isolated memories, and selectively composes evidence only from necessary memory types, reducing contamination from irrelevant or functionally incompatible evidence. Across hallucination and long-horizon conversation benchmarks, MemGuard improves memory reliability by up to 28.27% while retrieving up to 5.8x fewer memory tokens than prior methods. These results suggest that reliable long-term reasoning depends on principled organization and selective use of heterogeneous memory.

Memory is a fundamental component of AI systems, underpinning large language models (LLMs) based agents. While prior surveys have focused on memory applications with LLMs, they often overlook the atomic operations that underlie memory dynamics. In this survey, we first categorize memory representations into parametric, contextual structured, and contextual unstructured and then introduce six fundamental memory operations: Consolidation, Updating, Indexing, Forgetting, Retrieval, and Compression. We systematically map these operations to the most relevant research topics across long-term, long-context, parametric modification, and multi-source memory. By reframing memory systems through the lens of atomic operations and representation types, this survey provides a structured and dynamic perspective on research, benchmark datasets, and tools related to memory in AI, clarifying the functional interplay in LLMs based agents while outlining promising directions for future researchThe paper list, datasets, methods and tools are available at \href{https://github.com/Elvin-Yiming-Du/Survey_Memory_in_AI{https://github.com/Elvin-Yiming-Du/Survey\_Memory\_in\_AI}.}.

Long-term memory promises LLM agents that grow more capable across sessions, maintaining an accurate, evolving understanding of the user that interaction forms. In practice, however, this memory is evaluated mostly through downstream behavior, such as later answers, personalization quality, or task success, which tests that understanding only indirectly and leaves the memory artifact itself largely unaudited. We argue that long-term memory should instead be evaluated as an auditable post-interaction artifact: after ordinary assistance, what structured user state can be reconstructed from the memory the agent leaves behind? We instantiate this view in MEMPROBE, a benchmark in which a memory-equipped agent assists simulated users, each carrying a hidden, taxonomy-anchored user-state bank, across a trajectory of leak-controlled tasks, after which that bank is reconstructed from the agent's resulting memory under both full-store and top-k access. Built on synthetic ground truth for efficient, scalable measurement, MEMPROBE spans 50 simulated users with 31 hidden dimensions each (1,550 recovery targets) and tests 5 representative memory systems. Testing state-of-the-art memory agents, we find that successful assistance and recoverable memory behave as distinct capabilities. Task completion nearly saturates, even for a memoryless baseline, while category-balanced recovery stays moderate (about 0.6) and drops further under top-k retrieval. MEMPROBE is the first benchmark to study memory recovery directly, reconstructing the user state a system retains and scoring it against ground truth. We see recovery as a concrete objective for future memory agents to optimize, and MEMPROBE as a step toward an environment where agents are trained to remember their users, growing more faithful the longer they know them.

Recent works have highlighted the significance of memory mechanisms in LLM-based agents, which enable them to store observed information and adapt to dynamic environments. However, evaluating their memory capabilities still remains challenges. Previous evaluations are commonly limited by the diversity of memory levels and interactive scenarios. They also lack comprehensive metrics to reflect the memory capabilities from multiple aspects. To address these problems, in this paper, we construct a more comprehensive dataset and benchmark to evaluate the memory capability of LLM-based agents. Our dataset incorporates factual memory and reflective memory as different levels, and proposes participation and observation as various interactive scenarios. Based on our dataset, we present a benchmark, named MemBench, to evaluate the memory capability of LLM-based agents from multiple aspects, including their effectiveness, efficiency, and capacity. To benefit the research community, we release our dataset and project at https://github.com/import-myself/Membench.

Long-running AI agents need persistent memory. Memory supports learning across sessions, reduces repeated context injection, and enables auditing of past decisions. Current agent memory systems and database paradigms treat memory as storage. They localize correctness at records, embeddings, or edges. Each supplies only some of the capabilities that long-term memory requires. The result is four recurring failure modes: unregulated growth, missing semantic revision, capacity-driven forgetting, and read-only retrieval. In our vision, long-term agent memory is a new data-management workload. Its correctness is a property of the state trajectory, not of individual records. We formalize this as Governed Evolving Memory (GEM). GEM replaces record-level database operations with four state-level operators: ingestion, revision, forgetting, and retrieval. Six correctness conditions govern how the state evolves. Three structural observations establish that no record-level system can satisfy these conditions, regardless of the storage model. We realize the abstraction in MemState, a prototype on a property-graph backend. MemState validates feasibility and exposes the gap to a native engine. We outline three research directions that define memory-centric data management as a workload.

Recent research developing neural network architectures with external memory have often used the benchmark bAbI question and answering dataset which provides a challenging number of tasks requiring reasoning. Here we employed a classic associative inference task from the memory-based reasoning neuroscience literature in order to more carefully probe the reasoning capacity of existing memory-augmented architectures. This task is thought to capture the essence of reasoning -- the appreciation of distant relationships among elements distributed across multiple facts or memories. Surprisingly, we found that current architectures struggle to reason over long distance associations. Similar results were obtained on a more complex task involving finding the shortest path between nodes in a path. We therefore developed MEMO, an architecture endowed with the capacity to reason over longer distances. This was accomplished with the addition of two novel components. First, it introduces a separation between memories (facts) stored in external memory and the items that comprise these facts in external memory. Second, it makes use of an adaptive retrieval mechanism, allowing a variable number of "memory hops" before the answer is produced. MEMO is capable of solving our novel reasoning tasks, as well as match state of the art results in bAbI.

Memory-safety bugs introduce critical software-security issues. Rust provides memory-safe mechanisms to avoid memory-safety bugs in programming, while still allowing unsafe escape hatches via unsafe code. However, the unsafe code that enhances the usability of Rust provides clear spots for finding memory-safety bugs in Rust source code. In this paper, we claim that these unsafe spots can still be identifiable in Rust binary code via machine learning and be leveraged for finding memory-safety bugs. To support our claim, we propose the tool textttrustspot, that enables reverse engineering to learn an unsafe classifier that proposes a list of functions in Rust binaries for downstream analysis. We empirically show that the function proposals by textttrustspot can recall 92.92% of memory-safety bugs, while it covers only 16.79% of the entire binary code. As an application, we demonstrate that the function proposals are used in targeted fuzzing on Rust packages, which contribute to reducing the fuzzing time compared to non-targeted fuzzing.

Bug reports are vital for software maintenance that allow users to inform developers of the problems encountered while using the software. As such, researchers have committed considerable resources toward automating bug replay to expedite the process of software maintenance. Nonetheless, the success of current automated approaches is largely dictated by the characteristics and quality of bug reports, as they are constrained by the limitations of manually-crafted patterns and pre-defined vocabulary lists. Inspired by the success of Large Language Models (LLMs) in natural language understanding, we propose AdbGPT, a new lightweight approach to automatically reproduce the bugs from bug reports through prompt engineering, without any training and hard-coding effort. AdbGPT leverages few-shot learning and chain-of-thought reasoning to elicit human knowledge and logical reasoning from LLMs to accomplish the bug replay in a manner similar to a developer. Our evaluations demonstrate the effectiveness and efficiency of our AdbGPT to reproduce 81.3% of bug reports in 253.6 seconds, outperforming the state-of-the-art baselines and ablation studies. We also conduct a small-scale user study to confirm the usefulness of AdbGPT in enhancing developers' bug replay capabilities.

Large Language Model (LLM) agents, which integrate planning, memory, reflection, and tool-use modules, have shown promise in solving complex, multi-step tasks. Yet their sophisticated architectures amplify vulnerability to cascading failures, where a single root-cause error propagates through subsequent decisions, leading to task failure. Current systems lack a framework that can comprehensively understand agent error in a modular and systemic way, and therefore fail to detect these errors accordingly. We address this gap with three contributions. First, we introduce the AgentErrorTaxonomy, a modular classification of failure modes spanning memory, reflection, planning, action, and system-level operations. Second, we construct AgentErrorBench, the first dataset of systematically annotated failure trajectories from ALFWorld, GAIA, and WebShop, grounding error analysis in real-world agent rollouts. Third, we propose AgentDebug, a debugging framework that isolates root-cause failures and provides corrective feedback, enabling agents to recover and iteratively improve. Experiments on AgentErrorBench show that AgentDebug achieves 24% higher all-correct accuracy and 17% higher step accuracy compared to the strongest baseline. Beyond detection, the targeted feedback generated by AgentDebug enables LLM agents to iteratively recover from failures, yielding up to 26% relative improvements in task success across ALFWorld, GAIA, and WebShop. These results establish principled debugging as a pathway to more reliable and adaptive LLM agents. The code and data will be available at https://github.com/ulab-uiuc/AgentDebug

Program errors can occur in any type of programming, and can manifest in a variety of ways, such as unexpected output, crashes, or performance issues. And program error diagnosis can often be too abstract or technical for developers to understand, especially for beginners. The goal of this paper is to present a novel machine-learning approach for Multi-task Program Error Repair and Explanatory Diagnosis (mPRED). A pre-trained language model is used to encode the source code, and a downstream model is specifically designed to identify and repair errors. Programs and test cases will be augmented and optimized from several perspectives. Additionally, our approach incorporates a "chain of thoughts" method, which enables the models to produce intermediate reasoning explanations before providing the final correction. To aid in visualizing and analyzing the program structure, we use a graph neural network for program structure visualization. Overall, our approach offers a promising approach for repairing program errors across different programming languages and providing helpful explanations to programmers.

Language models of code (LMs) work well when the surrounding code in the vicinity of generation provides sufficient context. This is not true when it becomes necessary to use types or functionality defined in another module or library, especially those not seen during training. LMs suffer from limited awareness of such global context and end up hallucinating, e.g., using types defined in other files incorrectly. Recent work tries to overcome this issue by retrieving global information to augment the local context. However, this bloats the prompt or requires architecture modifications and additional training. Integrated development environments (IDEs) assist developers by bringing the global context at their fingertips using static analysis. We extend this assistance, enjoyed by developers, to the LMs. We propose a notion of monitors that use static analysis in the background to guide the decoding. Unlike a priori retrieval, static analysis is invoked iteratively during the entire decoding process, providing the most relevant suggestions on demand. We demonstrate the usefulness of our proposal by monitoring for type-consistent use of identifiers whenever an LM generates code for object dereference. To evaluate our approach, we curate PragmaticCode, a dataset of open-source projects with their development environments. On models of varying parameter scale, we show that monitor-guided decoding consistently improves the ability of an LM to not only generate identifiers that match the ground truth but also improves compilation rates and agreement with ground truth. We find that LMs with fewer parameters, when guided with our monitor, can outperform larger LMs. With monitor-guided decoding, SantaCoder-1.1B achieves better compilation rate and next-identifier match than the much larger text-davinci-003 model. The datasets and code will be released at https://aka.ms/monitors4codegen .

Large LMs such as GPT-3 are powerful, but can commit mistakes that are obvious to humans. For example, GPT-3 would mistakenly interpret "What word is similar to good?" to mean a homophone, while the user intended a synonym. Our goal is to effectively correct such errors via user interactions with the system but without retraining, which will be prohibitively costly. We pair GPT-3 with a growing memory of recorded cases where the model misunderstood the user's intents, along with user feedback for clarification. Such a memory allows our system to produce enhanced prompts for any new query based on the user feedback for error correction on similar cases in the past. On four tasks (two lexical tasks, two advanced ethical reasoning tasks), we show how a (simulated) user can interactively teach a deployed GPT-3, substantially increasing its accuracy over the queries with different kinds of misunderstandings by the GPT-3. Our approach is a step towards the low-cost utility enhancement for very large pre-trained LMs. Code, data, and instructions to implement MEMPROMPT for a new task at https://www.memprompt.com/.

Recent benchmarks for Large Language Model (LLM) agents mainly evaluate reasoning, planning, and execution. However, memory is also essential for agents, as it enables them to store, update, and retrieve information over time. This ability remains under-evaluated, largely because existing benchmarks do not provide a systematic way to assess memory mechanisms. In this paper, we study agent memory from a self-evolving perspective and introduce EvoMemBench, a unified benchmark organized along two axes: memory scope (in-episode vs. cross-episode) and memory content (knowledge-oriented vs. execution-oriented). We compare 15 representative memory methods with strong long-context baselines under a standardized protocol. Results show that current memory systems are still far from a general solution: long-context baselines remain highly competitive, memory helps most when the current context is insufficient or tasks are difficult, and no single memory form works consistently across all settings. Retrieval-based methods remain strong for knowledge-intensive settings, whereas procedural and long-term memory methods are more effective for execution-oriented tasks when their stored experience matches the task structure. We hope EvoMemBench facilitates future research on more effective memory systems for LLM-based agents. Our code is available at https://github.com/DSAIL-Memory/EvoMemBench.

Large language models (LLMs) have revolutionized AI, but are constrained by limited context windows, hindering their utility in tasks like extended conversations and document analysis. To enable using context beyond limited context windows, we propose virtual context management, a technique drawing inspiration from hierarchical memory systems in traditional operating systems that provide the appearance of large memory resources through data movement between fast and slow memory. Using this technique, we introduce MemGPT (Memory-GPT), a system that intelligently manages different memory tiers in order to effectively provide extended context within the LLM's limited context window, and utilizes interrupts to manage control flow between itself and the user. We evaluate our OS-inspired design in two domains where the limited context windows of modern LLMs severely handicaps their performance: document analysis, where MemGPT is able to analyze large documents that far exceed the underlying LLM's context window, and multi-session chat, where MemGPT can create conversational agents that remember, reflect, and evolve dynamically through long-term interactions with their users. We release MemGPT code and data for our experiments at https://memgpt.ai.

This paper presents a novel framework for automated code generation and debugging, designed to improve accuracy, efficiency, and scalability in software development. The proposed system integrates three core components LangGraph, GLM4 Flash, and ChromaDB within a four step iterative workflow to deliver robust performance and seamless functionality. LangGraph serves as a graph-based library for orchestrating tasks, providing precise control and execution while maintaining a unified state object for dynamic updates and consistency. It supports multi-agent, hierarchical, and sequential processes, making it highly adaptable to complex software engineering workflows. GLM4 Flash, a large language model, leverages its advanced capabilities in natural language understanding, contextual reasoning, and multilingual support to generate accurate code snippets based on user prompts. ChromaDB acts as a vector database for semantic search and contextual memory storage, enabling the identification of patterns and the generation of context-aware bug fixes based on historical data. The system operates through a structured four-step process: (1) Code Generation, which translates natural language descriptions into executable code; (2) Code Execution, which validates the code by identifying runtime errors and inconsistencies; (3) Code Repair, which iteratively refines buggy code using ChromaDB's memory capabilities and LangGraph's state tracking; and (4) Code Update, which ensures the code meets functional and performance requirements through iterative modifications.

The ability to handle long-term memory in LLMs is becoming increasingly critical, yet existing benchmarks remain English-centric and rely on aggregate retrieval metrics, failing to capture interactions between long-range context, temporal information, and reasoning. To address this, we introduce RUMBA (Russian User Memory BenchmArk) - a new benchmark for long-term conversational memory that provides a fine-grained taxonomy of memory-centric question types and a unified methodology accounting for semantic type, session scope, temporal reasoning, and the explicitness of temporal expressions. RUMBA consists of timestamped user-assistant dialogues with QA pairs requiring retrieval, combination, and reasoning across sessions. While designed for Russian, we also provide an aligned English subset under the same methodology. We evaluate contemporary memory systems and long-context models, and show how RUMBA serves as a diagnostic tool to analyze model behavior across benchmark slices and identify strengths and failure modes of different memory mechanisms.

To improve the reasoning capabilities of large language models, test-time compute is typically scaled by generating intermediate tokens before the final answer. However, this couples reasoning to autoregressive generation and thereby conflates internal computation with external communication. In contrast, human cognition can use working memory to hold and manipulate information internally without the need to externalize intermediate thoughts. Drawing on this principle, we introduce Reasoning in Memory (RiM), a latent reasoning method that replaces the autoregressive generation of reasoning steps with memory blocks. These memory blocks are fixed sequences of special tokens that unlock the working-memory capacity of large language models. Since they are fixed rather than generated, they can be processed in a single forward pass, enabling compute-efficient latent reasoning. To operationalize these memory blocks, we employ a two-stage curriculum. First, we ground them by predicting explicit reasoning steps after each memory block. Second, we discard this step-level supervision and iteratively refine the final answer after each memory block. Our experiments on reasoning benchmarks show that, across language models of different families and sizes, RiM matches or exceeds existing latent reasoning methods while avoiding the autoregressive generation of thoughts. These results demonstrate that large language models can be trained to use working memory as an effective mechanism for latent reasoning.

Real-world applications require the classification model to adapt to new classes without forgetting old ones. Correspondingly, Class-Incremental Learning (CIL) aims to train a model with limited memory size to meet this requirement. Typical CIL methods tend to save representative exemplars from former classes to resist forgetting, while recent works find that storing models from history can substantially boost the performance. However, the stored models are not counted into the memory budget, which implicitly results in unfair comparisons. We find that when counting the model size into the total budget and comparing methods with aligned memory size, saving models do not consistently work, especially for the case with limited memory budgets. As a result, we need to holistically evaluate different CIL methods at different memory scales and simultaneously consider accuracy and memory size for measurement. On the other hand, we dive deeply into the construction of the memory buffer for memory efficiency. By analyzing the effect of different layers in the network, we find that shallow and deep layers have different characteristics in CIL. Motivated by this, we propose a simple yet effective baseline, denoted as MEMO for Memory-efficient Expandable MOdel. MEMO extends specialized layers based on the shared generalized representations, efficiently extracting diverse representations with modest cost and maintaining representative exemplars. Extensive experiments on benchmark datasets validate MEMO's competitive performance. Code is available at: https://github.com/wangkiw/ICLR23-MEMO

A language model's memory can be worse than no memory at all when the model or its interface is disposed to act on it: a memory that keeps a wrong conclusion but drops the work behind it leads a model to re-emit the stale value as a confident answer, where an empty memory leads it to abstain. We call this brittle memory. The information loss is definitional; the finding is behavioral, and it turns on one thing, whether the memory kept a re-derivation basis (the source) rather than the answer. We measure it with reclaim evaluation: induce a known drift, compress at a fixed budget, deliver a correction that names the error, and score exact recovery, judge-free. Holding the budget fixed and varying only what the compression keeps isolates correctability from capability and from size; an 8B model and a frontier one wall in the same place. A one-line source-first policy, keep the recomputable source, drop the re-derivable conclusion, restores correctability at equal budget where the source is compact and identifiable, with a length-matched control ruling out "more text." We map where the fix fails, show the failure compounds through memory loops, and replicate across three deployed memory systems, real dialogue (MultiWOZ), and tau-bench, a deployed-agent benchmark where whether a lossy memory becomes a harmful action is a joint model-and-interface property. We release the harness, the paired memory conditions, and validators built to come out false.

Existing agent memory systems universally follow what we term a Memory-as-Tool paradigm where a single query triggers one-shot retrieval of flat passage lists, suffering from passive invocation, reasoning-retrieval decoupling, and structural mismatch between retrieved fragments and the agent's navigational needs. We propose MemCog, a Memory-as-Cognition system that makes memory access an integral part of the reasoning process. MemCog organizes user knowledge as Navigable Memory Store with associative link graphs, exposes Cross-Dimensional Navigation Interface for multi-step reasoning-driven traversal, and employs Proactive Reasoning Protocol that drives agents to spontaneously initiate memory exploration from conversational context. We additionally construct ProactiveMemBench, the first benchmark for evaluating proactive memory triggering. Experiments show that MemCog achieves state-of-the-art on passive QA benchmarks (92.98 on LoCoMo, 95.8 on LongMemEval) while substantially outperforming baselines on ProactiveMemBench, demonstrating the advantage of Memory-as-Cognition.

Large Language Models (LLMs) are consistently improving at increasingly realistic software engineering (SE) tasks. In real-world software stacks, significant SE effort is spent developing foundational system software like the Linux kernel. Unlike application-level software, a systems codebase like Linux is multilingual (low-level C/Assembly/Bash/Rust); gigantic (>20 million lines); critical (impacting billions of devices worldwide), and highly concurrent (involving complex multi-threading). To evaluate if ML models are useful while developing such large-scale systems-level software, we introduce kGym (a platform) and kBench (a dataset). The kGym platform provides a SE environment for large-scale experiments on the Linux kernel, including compiling and running kernels in parallel across several virtual machines, detecting operations and crashes, inspecting logs, and querying and patching the code base. We use kGym to facilitate evaluation on kBench, a crash resolution benchmark drawn from real-world Linux kernel bugs. An example bug in kBench contains crashing stack traces, a bug-reproducer file, a developer-written fix, and other associated data. To understand current performance, we conduct baseline experiments by prompting LLMs to resolve Linux kernel crashes. Our initial evaluations reveal that the best performing LLM achieves 0.72% and 5.38% in the unassisted and assisted (i.e., buggy files disclosed to the model) settings, respectively. These results highlight the need for further research to enhance model performance in SE tasks. Improving performance on kBench requires models to master new learning skills, including understanding the cause of crashes and repairing faults, writing memory-safe and hardware-aware code, and understanding concurrency. As a result, this work opens up multiple avenues of research at the intersection of machine learning and systems software.

Data movement between the CPU and main memory is a first-order obstacle against improving performance, scalability, and energy efficiency in modern systems. Computer systems employ a range of techniques to reduce overheads tied to data movement, spanning from traditional mechanisms (e.g., deep multi-level cache hierarchies, aggressive hardware prefetchers) to emerging techniques such as Near-Data Processing (NDP), where some computation is moved close to memory. Our goal is to methodically identify potential sources of data movement over a broad set of applications and to comprehensively compare traditional compute-centric data movement mitigation techniques to more memory-centric techniques, thereby developing a rigorous understanding of the best techniques to mitigate each source of data movement. With this goal in mind, we perform the first large-scale characterization of a wide variety of applications, across a wide range of application domains, to identify fundamental program properties that lead to data movement to/from main memory. We develop the first systematic methodology to classify applications based on the sources contributing to data movement bottlenecks. From our large-scale characterization of 77K functions across 345 applications, we select 144 functions to form the first open-source benchmark suite (DAMOV) for main memory data movement studies. We select a diverse range of functions that (1) represent different types of data movement bottlenecks, and (2) come from a wide range of application domains. Using NDP as a case study, we identify new insights about the different data movement bottlenecks and use these insights to determine the most suitable data movement mitigation mechanism for a particular application. We open-source DAMOV and the complete source code for our new characterization methodology at https://github.com/CMU-SAFARI/DAMOV.

Context: Bugs in code are inevitable and can lead to severe consequences, ranging from security vulnerabilities to operational failures. Debugging software remains challenging despite advances in testing and verification, often requiring extensive manual effort. Learning-based automated program repair (APR) has shown promise in reducing the time, effort, and cost of manually fixing bugs. However, existing techniques face several challenges, including language-dependent strategies, limited bug context utilization, and difficulties in handling bugs that span multiple locations in the code. Objective: This paper introduces MultiMend, a learning-based APR approach designed to improve repair performance on multiple programming languages with language-independent context augmentation and multi-hunk patch generation. Method: MultiMend fine-tunes a pre-trained encoder-decoder transformer model (CodeT5) to generate bug-fixing patches. It embeds source code lines and applies retrieval-augmented generation to augment the buggy context with relevant lines during patch generation. The approach systematically constructs patches for multi-hunk bugs to reduce the needed patch validations. We evaluate MultiMend on four benchmarks with four programming languages and compare it with state-of-the-art methods. Results: Experimental results show that MultiMend achieves competitive effectiveness and efficiency against compared tools. Across all benchmarks, MultiMend fixes 2,077 bugs, of which 1,455 are identical to the developer's patch, and 106 are for multi-hunk bugs. Both context augmentation and multi-hunk patch generation positively contribute to the results. Conclusion: MultiMend shows promising performance across benchmarks. The findings highlight its applicability to real-world software maintenance and its potential to reduce manual debugging efforts.

Existing self-evolving memory systems mainly improve agent memory based on textual outputs, such as task trajectories and reflections. However, this text-based paradigm rarely incorporates internal mechanistic signals, leaving how retrieved memory is actually utilized during task execution underexplored. This limitation can lead to unreliable error attribution and hallucinated memory modifications. In this work, we show that retrieval-head attention provides a mechanistic signal for revealing segment-level memory utilization. By aggregating attention over memory segments and decision steps, we construct a context utilization matrix that exposes recurring memory-use patterns and indicates corresponding refinement strategies. Building on this observation, we propose Attention-Guided Memory Refinement (AGMR), a framework that uses utilization patterns revealed by attention to guide targeted segment-level memory updates. AGMR corrects or enhances memory for failed executions, simplifies memory for successful executions, and verifies each update through re-execution. Experiments on interactive decision-making benchmarks show that AGMR improves both task performance and memory efficiency over text-only memory refinement baselines. Code is available at https://anonymous.4open.science/r/AGMR_code-3262/

We describe a family of architectures to support transductive inference by allowing memory to grow to a finite but a-priori unknown bound while making efficient use of finite resources for inference. Current architectures use such resources to represent data either eidetically over a finite span ("context" in Transformers), or fading over an infinite span (in State Space Models, or SSMs). Recent hybrid architectures have combined eidetic and fading memory, but with limitations that do not allow the designer or the learning process to seamlessly modulate the two, nor to extend the eidetic memory span. We leverage ideas from Stochastic Realization Theory to develop a class of models called B'MOJO to seamlessly combine eidetic and fading memory within an elementary composable module. The overall architecture can be used to implement models that can access short-term eidetic memory "in-context," permanent structural memory "in-weights," fading memory "in-state," and long-term eidetic memory "in-storage" by natively incorporating retrieval from an asynchronously updated memory. We show that Transformers, existing SSMs such as Mamba, and hybrid architectures such as Jamba are special cases of B'MOJO and describe a basic implementation, to be open sourced, that can be stacked and scaled efficiently in hardware. We test B'MOJO on transductive inference tasks, such as associative recall, where it outperforms existing SSMs and Hybrid models; as a baseline, we test ordinary language modeling where B'MOJO achieves perplexity comparable to similarly-sized Transformers and SSMs up to 1.4B parameters, while being up to 10% faster to train. Finally, we show that B'MOJO's ability to modulate eidetic and fading memory results in better inference on longer sequences tested up to 32K tokens, four-fold the length of the longest sequences seen during training.

Memory-augmented LLM agents maintain external memory banks to support long-horizon interaction, yet most existing systems treat construction, retrieval, and utilization as isolated subroutines. This creates two coupled challenges: strategic blindness on the forward path of the memory cycle, where construction and retrieval are driven by local heuristics rather than explicit strategic reasoning, and sparse, delayed supervision on the backward path, where downstream failures rarely translate into direct repairs of the memory bank. To address these challenges, we propose MemMA, a plug-and-play multi-agent framework that coordinates the memory cycle along both the forward and backward paths. On the forward path, a Meta-Thinker produces structured guidance that steers a Memory Manager during construction and directs a Query Reasoner during iterative retrieval. On the backward path, MemMA introduces in-situ self-evolving memory construction, which synthesizes probe QA pairs, verifies the current memory, and converts failures into repair actions before the memory is finalized. Extensive experiments on LoCoMo show that MemMA consistently outperforms existing baselines across multiple LLM backbones and improves three different storage backends in a plug-and-play manner. Our code is publicly available at https://github.com/ventr1c/memma.

Coding agents ship with one kind of memory: documents. Instruction files, plan artifacts, and auto-written memory directories are deliberately authored and deliberately retrieved: the agent must choose to write them and choose to read them back. Human expertise runs on a second tier that never gets written down: situationally-bound operational facts (gotchas, locations, local conventions) encoded as a side effect of the work and retrieved involuntarily when the situation cues them. We argue this second tier is the load-bearing one for long-running agents and must be a harness property, not an agent choice. We contribute: (1) a two-tier design theory grounded in the cognitive literature on memory offloading, incidental encoding, and event-based prospective memory, each mapped to an architectural requirement; (2) a cue-anchored memory model where memories carry first-class trigger conditions over a composable vocabulary (path, symbol, semantic, event, temporal), evaluated deterministically by the harness, a composition no surveyed academic or shipped system provides; (3) a controlled evaluation on a real coding task showing that voluntary memory use is near zero even with a pre-seeded store (0 memory operations in 114 turns), that deterministic injection delivered in every seeded run with zero false alarms, and that 39% of intra-session re-reads re-buy content paid for before a compaction boundary; (4) a repeated-compaction decay probe: ten facts held only in conversation vanish at the first summary and stay absent from 106 of 108 compactions, and the deprived agent greps the harness's own session files to rebuild them, while the same facts injected from a harness-owned store arrive intact through all 138 compact-resumes as the final summary carries none. Delivery, not storage, is the product: the reliable memory channel for agents is the one the agent never has to think about.

Correcting bugs using modern Automated Program Repair (APR) can be both time-consuming and resource-expensive. We describe a program repair approach that aims to improve the scalability of modern APR tools. The approach leverages program reduction in the form of program slicing to eliminate code irrelevant to fixing the bug, which improves the APR tool's overall performance. We investigate slicing's impact on all three phases of the repair process: fault localization, patch generation, and patch validation. Our empirical exploration finds that the proposed approach, on average, enhances the repair ability of the TBar APR tool, but we also discovered a few cases where it was less successful. Specifically, on examples from the widely used Defects4J dataset, we obtain a substantial reduction in median repair time, which falls from 80 minutes to just under 18 minutes. We conclude that program reduction can improve the performance of APR without degrading repair quality, but this improvement is not universal. A replication package is available via Zenodo at https://doi.org/10.5281/zenodo.13074333. Keywords: automated program repair, dynamic program slicing, fault localization, test-suite reduction, hybrid techniques.

Large language models have been shown to struggle with limited context memory and multi-step reasoning. We propose a simple method for solving both of these problems by allowing the model to take Self-Notes. Unlike recent scratchpad approaches, the model can deviate from the input context at any time to explicitly think. This allows the model to recall information and perform reasoning on the fly as it reads the context, thus extending its memory and enabling multi-step reasoning. Our experiments on multiple tasks demonstrate that our method can successfully generalize to longer and more complicated instances from their training setup by taking Self-Notes at inference time.

Language models are increasingly being deployed as user simulators, but their memory is far more reliable than that of real users. To measure this gap, we run a series of classic memory experiments from psychology on both humans and language models. Across tasks, we find that out-of-the-box language models exhibit better memory than humans, even when prompted to imitate human behavior. We then show that better prompting strategies and the use of a compactor can cause language models to forget content in a more human-like way. Using these methods, we show preliminary evidence that language models with human-like memory constraints can function as more effective user simulators in a downstream education task. Finally, we release human reference data and benchmarks to support future work on simulating human memory with language models.

Memory embeddings are crucial for memory-augmented systems, such as OpenClaw, but their evaluation is underexplored in current text embedding benchmarks, which narrowly focus on traditional passage retrieval and fail to assess models' ability to handle long-horizon memory retrieval tasks involving fragmented, context-dependent, and temporally distant information. To address this, we introduce the Long-horizon Memory Embedding Benchmark (LMEB), a comprehensive framework that evaluates embedding models' capabilities in handling complex, long-horizon memory retrieval tasks. LMEB spans 22 datasets and 193 zero-shot retrieval tasks across 4 memory types: episodic, dialogue, semantic, and procedural, with both AI-generated and human-annotated data. These memory types differ in terms of level of abstraction and temporal dependency, capturing distinct aspects of memory retrieval that reflect the diverse challenges of the real world. We evaluate 15 widely used embedding models, ranging from hundreds of millions to ten billion parameters. The results reveal that (1) LMEB provides a reasonable level of difficulty; (2) Larger models do not always perform better; (3) LMEB and MTEB exhibit orthogonality. This suggests that the field has yet to converge on a universal model capable of excelling across all memory retrieval tasks, and that performance in traditional passage retrieval may not generalize to long-horizon memory retrieval. In summary, by providing a standardized and reproducible evaluation framework, LMEB fills a crucial gap in memory embedding evaluation, driving further advancements in text embedding for handling long-term, context-dependent memory retrieval. LMEB is available at https://github.com/KaLM-Embedding/LMEB.

Large language models (LLMs) often struggle with visualization tasks like plotting diagrams, charts, where success depends on both code correctness and visual semantics. Existing instruction-tuning datasets lack execution-grounded supervision and offer limited support for iterative code correction, resulting in fragile and unreliable plot generation. We present VisCode-200K, a large-scale instruction tuning dataset for Python-based visualization and self-correction. It contains over 200K examples from two sources: (1) validated plotting code from open-source repositories, paired with natural language instructions and rendered plots; and (2) 45K multi-turn correction dialogues from Code-Feedback, enabling models to revise faulty code using runtime feedback. We fine-tune Qwen2.5-Coder-Instruct on VisCode-200K to create VisCoder, and evaluate it on PandasPlotBench. VisCoder significantly outperforms strong open-source baselines and approaches the performance of proprietary models like GPT-4o-mini. We further adopt a self-debug evaluation protocol to assess iterative repair, demonstrating the benefits of feedback-driven learning for executable, visually accurate code generation.

Incrementally fine-tuning foundational models on new tasks or domains is now the de facto approach in NLP. A known pitfall of this approach is the catastrophic forgetting of prior knowledge that happens during fine-tuning. A common approach to alleviate such forgetting is to rehearse samples from prior tasks during fine-tuning. Several existing works assume a fixed memory buffer to store prior task examples, while relying on inferences (forward passes) with the model at hand for choosing examples for rehearsal from the buffer. However, given the increasing computational cost of model inference, and decreasing cost of data storage, we focus on the setting to rehearse samples with a fixed computational budget instead of a fixed memory budget. We propose a sampling scheme, \bf mix-cd, that prioritizes rehearsal of ``collateral damage'' samples, which are samples predicted correctly by the prior model but forgotten by the incrementally tuned one. The crux of our scheme is a procedure to efficiently estimate the density of collateral damage samples without incurring additional model inferences. Our approach is computationally efficient, easy to implement, and outperforms several leading continual learning methods in compute-constrained settings. All the code will be publicly available at https://github.com/jybai/mix-cd-rehearsal.

Large Language Models (LLMs) frequently memorize long sequences verbatim, often with serious legal and privacy implications. Much prior work has studied such verbatim memorization using observational data. To complement such work, we develop a framework to study verbatim memorization in a controlled setting by continuing pre-training from Pythia checkpoints with injected sequences. We find that (1) non-trivial amounts of repetition are necessary for verbatim memorization to happen; (2) later (and presumably better) checkpoints are more likely to verbatim memorize sequences, even for out-of-distribution sequences; (3) the generation of memorized sequences is triggered by distributed model states that encode high-level features and makes important use of general language modeling capabilities. Guided by these insights, we develop stress tests to evaluate unlearning methods and find they often fail to remove the verbatim memorized information, while also degrading the LM. Overall, these findings challenge the hypothesis that verbatim memorization stems from specific model weights or mechanisms. Rather, verbatim memorization is intertwined with the LM's general capabilities and thus will be very difficult to isolate and suppress without degrading model quality.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

Program repair techniques offer cost-saving benefits for debugging within software development and programming education scenarios. With the proven effectiveness of Large Language Models (LLMs) in code-related tasks, researchers have explored their potential for program repair. However, it is crucial to recognize that existing repair benchmarks may have influenced LLM training data, potentially causing data leakage. To evaluate LLMs' realistic repair capabilities, (1) we introduce an extensive, non-crawled benchmark, referred to as TutorCode, comprising 1,239 C++ defect codes and associated information such as tutor guidance, solution description, failing test cases, and the corrected code. Our work assesses the repair performance of 12 LLMs on TutorCode, measuring repair correctness (TOP-5 and AVG-5) and patch precision (RPSR). (2) We then provide a comprehensive investigation into which types of extra information can help LLMs improve their performance in repairing defects. Among these types, tutor guidance was found to be the most effective information in enhancing LLM repair capabilities. To fully harness LLMs' conversational capabilities and the benefits of augmented information, (3) we introduce a novel conversational semi-automatic repair framework CREF assisting human tutor. It demonstrates a remarkable AVG-5 improvement of 17.2%-24.6% compared to the baseline, achieving an impressive AVG-5 of 76.6% when utilizing GPT-4. These results highlight the potential for enhancing LLMs' repair capabilities through interactions with tutors and historical conversations involving incorrect responses. The successful application of CREF in a real-world educational setting demonstrates its effectiveness in reducing tutors' workload and improving students' learning experience, while also showcasing its promise for facilitating other software engineering tasks, such as code review.

Memory-based self-evolution has emerged as a promising paradigm for coding agents. However, existing approaches typically restrict memory utilization to homogeneous task domains, failing to leverage the shared infrastructural foundations, such as runtime environments and programming languages, that exist across diverse real-world coding problems. To address this limitation, we investigate Memory Transfer Learning (MTL) by harnessing a unified memory pool from heterogeneous domains. We evaluate performance across 6 coding benchmarks using four memory representations, ranging from concrete traces to abstract insights. Our experiments demonstrate that cross-domain memory improves average performance by 3.7\%, primarily by transferring meta-knowledge, such as validation routines, rather than task-specific code. Importantly, we find that abstraction dictates transferability; high-level insights generalize well, whereas low-level traces often induce negative transfer due to excessive specificity. Furthermore, we show that transfer effectiveness scales with the size of the memory pool, and memory can be transferred even between different models. Our work establishes empirical design principles for expanding memory utilization beyond single-domain silos. Project page: https://memorytransfer.github.io/

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

With the growing interest on Large Language Models (LLMs) for fault localization and program repair, ensuring the integrity and generalizability of the LLM-based methods becomes paramount. The code in existing widely-adopted benchmarks for these tasks was written before the the bloom of LLMs and may be included in the training data of existing popular LLMs, thereby suffering from the threat of data leakage, leading to misleadingly optimistic performance metrics. To address this issue, we introduce "ConDefects", a novel dataset of real faults meticulously curated to eliminate such overlap. ConDefects contains 1,254 Java faulty programs and 1,625 Python faulty programs. All these programs are sourced from the online competition platform AtCoder and were produced between October 2021 and September 2023. We pair each fault with fault locations and the corresponding repaired code versions, making it tailored for in fault localization and program repair related research. We also provide interfaces for selecting subsets based on different time windows and coding task difficulties. While inspired by LLM-based tasks, ConDefects can be adopted for benchmarking ALL types of fault localization and program repair methods. The dataset is publicly available, and a demo video can be found at https://www.youtube.com/watch?v=22j15Hj5ONk.

In this paper, we present the first comprehensive empirical study of specialized LLM-based detectors and compare them with traditional static analyzers at the project scale. Specifically, our study evaluates five latest and representative LLM-based methods and two traditional tools using: 1) an in-house benchmark of 222 known real-world vulnerabilities (C/C++ and Java) to assess detection capability, and 2) 24 active open-source projects, where we manually inspected 385 warnings to assess their practical usability and underlying root causes of failures. Our evaluation yields three key findings: First, while LLM-based detectors exhibit low recall on the in-house benchmark, they still uncover more unique vulnerabilities than traditional tools. Second, in open-source projects, both LLM-based and traditional tools generate substantial warnings but suffer from very high false discovery rates, hindering practical use. Our manual analysis further reveals shallow interprocedural reasoning and misidentified source/sink pairs as primary failure causes, with LLM-based tools exhibiting additional unique failures. Finally, LLM-based methods incurs substantial computational costs-hundreds of thousands to hundreds of millions of tokens and multi-hour to multi-day runtimes. Overall, our findings underscore critical limitations in the robustness, reliability, and scalability of current LLM-based detectors. We ultimately summarize a set of implications for future research toward more effective and practical project-scale vulnerability detection.

Long-term memory is crucial for agents in specialized web environments, where success depends on recalling interface affordances, state dynamics, workflows, and recurring failure modes. However, existing memory benchmarks for agents mostly focus on user histories, short traces, or downstream task success, leaving open how to directly evaluate whether memory systems effectively internalize environment-specific experience. To address this gap, we introduce LongMemEval-V2 (LME-V2), a benchmark for evaluating whether memory systems can help agents acquire the experience needed to become knowledgeable colleagues in customized environments. LME-V2 contains 451 manually curated questions covering five core memory abilities for web agents: static state recall, dynamic state tracking, workflow knowledge, environment gotchas, and premise awareness. Questions are paired with history trajectories containing up to 500 trajectories and 115M tokens. We use a context gathering formulation: memory systems consume history trajectories and return compact evidence for downstream question answering. We propose a suite of two memory methods: AgentRunbook-R, an efficient RAG-based memory with knowledge pools for raw state observations, events, and strategy notes, and AgentRunbook-C, which stores trajectories as files and invokes a coding agent to gather evidence in an augmented sandbox. Experiments show that AgentRunbook-C achieves the best performance with 72.5% average accuracy, outperforming the strongest RAG baseline (48.5%) and the off-the-shelf coding agent baseline (69.3%). Despite the strong performance gains, coding agent based methods have high latency costs. While AgentRunbook-C advances the accuracy-latency Pareto frontier, substantial room for improvement remains. Together, these results establish LME-V2 as a challenging testbed for developing long-term memory systems for environment experience.

To break the context limits of large language models (LLMs) that bottleneck reasoning accuracy and efficiency, we propose the Thread Inference Model (TIM), a family of LLMs trained for recursive and decompositional problem solving, and TIMRUN, an inference runtime enabling long-horizon structured reasoning beyond context limits. Together, TIM hosted on TIMRUN supports virtually unlimited working memory and multi-hop tool calls within a single language model inference, overcoming output limits, positional-embedding constraints, and GPU-memory bottlenecks. Performance is achieved by modeling natural language as reasoning trees measured by both length and depth instead of linear sequences. The reasoning trees consist of tasks with thoughts, recursive subtasks, and conclusions based on the concept we proposed in Schroeder et al, 2025. During generation, we maintain a working memory that retains only the key-value states of the most relevant context tokens, selected by a rule-based subtask-pruning mechanism, enabling reuse of positional embeddings and GPU memory pages throughout reasoning. Experimental results show that our system sustains high inference throughput, even when manipulating up to 90% of the KV cache in GPU memory. It also delivers accurate reasoning on mathematical tasks and handles information retrieval challenges that require long-horizon reasoning and multi-hop tool use.

Large language model (LLM) based agents have recently attracted much attention from the research and industry communities. Compared with original LLMs, LLM-based agents are featured in their self-evolving capability, which is the basis for solving real-world problems that need long-term and complex agent-environment interactions. The key component to support agent-environment interactions is the memory of the agents. While previous studies have proposed many promising memory mechanisms, they are scattered in different papers, and there lacks a systematical review to summarize and compare these works from a holistic perspective, failing to abstract common and effective designing patterns for inspiring future studies. To bridge this gap, in this paper, we propose a comprehensive survey on the memory mechanism of LLM-based agents. In specific, we first discuss ''what is'' and ''why do we need'' the memory in LLM-based agents. Then, we systematically review previous studies on how to design and evaluate the memory module. In addition, we also present many agent applications, where the memory module plays an important role. At last, we analyze the limitations of existing work and show important future directions. To keep up with the latest advances in this field, we create a repository at https://github.com/nuster1128/LLM_Agent_Memory_Survey.

Autoregressive decoding remains a primary bottleneck in large language model (LLM) serving, motivating speculative decoding methods that reduce expensive teacher-model invocations by verifying multiple candidate tokens per step. Tree-structured speculation further increases parallelism, but is often brittle when ported across heterogeneous backends and accelerator stacks, where attention masking, KV-cache layouts, and indexing semantics are not interchangeable. We present EAGLE-Pangu, a reproducible system that ports EAGLE-3-style tree speculative decoding to a Pangu teacher backend on Ascend NPUs. EAGLE-Pangu contributes (i) an explicit branch/commit cache manager built on the Cache API, (ii) accelerator-safe tree tensorization that removes undefined negative indices by construction and validates structural invariants, and (iii) a fused-kernel-compatible teacher verification path with a debuggable eager fallback. On 240 turns from MT-Bench and HumanEval-style prompts, EAGLE-Pangu improves end-to-end decoding throughput by 1.27x on average, up to 2.46x at p99, over teacher-only greedy decoding in the fused-kernel performance path. We also provide a fused-kernel-free reference path with structured traces and invariant checks to support reproducible debugging and ablation across execution modes and tree budgets.

Machine unlearning in LLMs is the targeted removal of specific knowledge while preserving all other capabilities, critical for privacy and safety. Yet existing benchmarks measure it unreliably. They miss knowledge that resurfaces under paraphrased or indirect queries, a failure we call under-forgetting, and lack the semantic, syntactic, and lexical probes needed to verify that unrelated knowledge is preserved, a failure we call over-forgetting. Both failures reflect an asymmetric generalization problem. Forget evaluation must cover diverse query formulations of the same target facts, testing whether forgetting holds beyond exact training prompts. Retain evaluation must probe a far larger and implicitly defined set, namely every fact disjoint from the forget target. The retain set thus defines the effective forget set, yet current datasets provide no fine-grained annotation of this forget-retain boundary. We address this with SUITE, an evaluation protocol and training corpus that captures forget-retain structure for real-world factual domains. Methods trained on SUITE improve substantially, showing that training data is as important as algorithmic design. Building on the obtained insights, we introduce JensUn++, an unlearning algorithm that achieves the best forget-retain utility trade-off across three LLMs, in both sequential and joint unlearning settings. Code and datasets are available at https://amitpeleg.github.io/forget-narrowly-retain-broadly

Memory data are ubiquitous in Large Language Model (LLM)-based agents (e.g., OpenClaw and Manus). A few recent works have attempted to exploit agents'memory for improving their performance on the question-answering (QA) task, but they lack a principled mechanism for effectively modeling how memory data evolves over time and retrieving memory data effectively, leading to poor performance in memory utilization. To fill this gap, we present H-Mem, a novel memory mechanism via a hybrid structure that can not only effectively model the evolution of agent memory over a long period of time, but also provide an efficient memory retrieval approach. Particularly, H-Mem builds a temporal and semantic tree structure that allows the short-term memory data to evolve progressively into long-term memory data, where the latter provides summarized information about the former, while simultaneously constructing a knowledge graph to capture the relationships between entities in memory. Moreover, it offers an effective memory retrieval approach by exploiting the hybrid structure of the tree and graph structures. Extensive experiments on three agent memory benchmarks show that H-Mem achieves state-of-the-art performance on the QA task.

Large Language Model (LLM) agents use memory to learn from past interactions, enabling autonomous planning and decision-making in complex environments. However, this reliance on memory introduces a critical security risk: an adversary can inject seemingly harmless records into an agent's memory to manipulate its future behavior. This vulnerability is characterized by two core aspects: First, the malicious effect of injected records is only activated within a specific context, making them hard to detect when individual memory entries are audited in isolation. Second, once triggered, the manipulation can initiate a self-reinforcing error cycle: the corrupted outcome is stored as precedent, which not only amplifies the initial error but also progressively lowers the threshold for similar attacks in the future. To address these challenges, we introduce A-MemGuard (Agent-Memory Guard), the first proactive defense framework for LLM agent memory. The core idea of our work is the insight that memory itself must become both self-checking and self-correcting. Without modifying the agent's core architecture, A-MemGuard combines two mechanisms: (1) consensus-based validation, which detects anomalies by comparing reasoning paths derived from multiple related memories and (2) a dual-memory structure, where detected failures are distilled into ``lessons'' stored separately and consulted before future actions, breaking error cycles and enabling adaptation. Comprehensive evaluations on multiple benchmarks show that A-MemGuard effectively cuts attack success rates by over 95% while incurring a minimal utility cost. This work shifts LLM memory security from static filtering to a proactive, experience-driven model where defenses strengthen over time. Our code is available in https://github.com/TangciuYueng/AMemGuard

Large language models (LLMs) with memory are computationally universal. However, mainstream LLMs are not taking full advantage of memory, and the designs are heavily influenced by biological brains. Due to their approximate nature and proneness to the accumulation of errors, conventional neural memory mechanisms cannot support LLMs to simulate complex reasoning. In this paper, we seek inspiration from modern computer architectures to augment LLMs with symbolic memory for complex multi-hop reasoning. Such a symbolic memory framework is instantiated as an LLM and a set of SQL databases, where the LLM generates SQL instructions to manipulate the SQL databases. We validate the effectiveness of the proposed memory framework on a synthetic dataset requiring complex reasoning. The project website is available at https://chatdatabase.github.io/ .

Long-term LLM agents need persistent memory that can track changing facts and provide relevant evidence across sessions. Existing memory systems often store observations as isolated records, summaries, or indexed fragments, which makes evidence aggregation, fact revision, and memory maintenance difficult. We propose Infini Memory, a maintainable text-based persistent memory architecture that treats agent memory as topic-structured documents. Each topic document serves as a semantic unit for collecting related evidence, preserving metadata, and revising facts over time. New observations are first staged in a buffer and periodically consolidated into coherent textual contexts. At inference time, an agentic retrieval procedure lets the LLM read memory through iterative tool calls rather than a single retrieval step. On MemoryAgentBench, Infini Memory achieves 64.7% overall score. Ablations show that topic-structured maintenance and iterative evidence inspection improve complementary aspects of long-term memory use.

Memory safety violations in low-level code, written in languages like C, continues to remain one of the major sources of software vulnerabilities. One method of removing such violations by construction is to port C code to a safe C dialect. Such dialects rely on programmer-supplied annotations to guarantee safety with minimal runtime overhead. This porting, however, is a manual process that imposes significant burden on the programmer and, hence, there has been limited adoption of this technique. The task of porting not only requires inferring annotations, but may also need refactoring/rewriting of the code to make it amenable to such annotations. In this paper, we use Large Language Models (LLMs) towards addressing both these concerns. We show how to harness LLM capabilities to do complex code reasoning as well as rewriting of large codebases. We also present a novel framework for whole-program transformations that leverages lightweight static analysis to break the transformation into smaller steps that can be carried out effectively by an LLM. We implement our ideas in a tool called MSA that targets the CheckedC dialect. We evaluate MSA on several micro-benchmarks, as well as real-world code ranging up to 20K lines of code. We showcase superior performance compared to a vanilla LLM baseline, as well as demonstrate improvement over a state-of-the-art symbolic (non-LLM) technique.

Code Large Language Models (Code LLMs) have excelled at tasks like code completion but often miss deeper semantics such as execution effects and dynamic states. This paper aims to bridge the gap between Code LLMs' reliance on static text data and the need for semantic understanding for complex tasks like debugging and program repair. We introduce a novel strategy, monologue reasoning, to train Code LLMs to reason comprehensive semantics, encompassing high-level functional descriptions, local execution effects of individual statements, and overall input/output behavior, thereby linking static code text with dynamic execution states. We begin by collecting PyX, a clean Python corpus of fully executable code samples with functional descriptions and test cases. We propose training Code LLMs not only to write code but also to understand code semantics by reasoning about key properties, constraints, and execution behaviors using natural language, mimicking human verbal debugging, i.e., rubber-duck debugging. This approach led to the development of SemCoder, a Code LLM with only 6.7B parameters, which shows competitive performance with GPT-3.5-turbo on code generation and execution reasoning tasks. SemCoder achieves 79.3% on HumanEval (GPT-3.5-turbo: 76.8%), 63.6% on CRUXEval-I (GPT-3.5-turbo: 50.3%), and 63.9% on CRUXEval-O (GPT-3.5-turbo: 59.0%). We also study the effectiveness of SemCoder's monologue-style execution reasoning compared to concrete scratchpad reasoning, showing that our approach integrates semantics from multiple dimensions more smoothly. Finally, we demonstrate the potential of applying learned semantics to improve Code LLMs' debugging and self-refining capabilities. Our data, code, and models are available at: https://github.com/ARiSE-Lab/SemCoder.

Memory systems are key components that enable AI systems such as LLMs and AI agents to achieve long-term learning and sustained interaction. However, during memory storage and retrieval, these systems frequently exhibit memory hallucinations, including fabrication, errors, conflicts, and omissions. Existing evaluations of memory hallucinations are primarily end-to-end question answering, which makes it difficult to localize the operational stage within the memory system where hallucinations arise. To address this, we introduce the Hallucination in Memory Benchmark (HaluMem), the first operation level hallucination evaluation benchmark tailored to memory systems. HaluMem defines three evaluation tasks (memory extraction, memory updating, and memory question answering) to comprehensively reveal hallucination behaviors across different operational stages of interaction. To support evaluation, we construct user-centric, multi-turn human-AI interaction datasets, HaluMem-Medium and HaluMem-Long. Both include about 15k memory points and 3.5k multi-type questions. The average dialogue length per user reaches 1.5k and 2.6k turns, with context lengths exceeding 1M tokens, enabling evaluation of hallucinations across different context scales and task complexities. Empirical studies based on HaluMem show that existing memory systems tend to generate and accumulate hallucinations during the extraction and updating stages, which subsequently propagate errors to the question answering stage. Future research should focus on developing interpretable and constrained memory operation mechanisms that systematically suppress hallucinations and improve memory reliability.